| Name | Project | Type | Compare |
|---|---|---|---|
| Tartu, Estonia | V2G-QUESTS | PED Relevant Case Study | Compare |
| Utrecht, the Netherlands (District of Kanaleneiland) | V2G-QUESTS | PED Relevant Case Study | Compare |
| Aveiro, Portugal | V2G-QUESTS | PED Relevant Case Study | Compare |
| Győr Geothermal District Heating Project | PED Relevant Case Study | Compare | |
| Jacobs Borchs Gate, Drammen | PED Relevant Case Study | Compare | |
| Dietenbach, Freiburg im Breisgau | PED Relevant Case Study | Compare | |
| SmartEnCity, Lecce | SmartEnCity – Towards Smart Zero CO2 Cities across Europe | PED Relevant Case Study | Compare |
| STARDUST, Trento | STARDUST – Holistic and Integrated Urban Model for Smart Cities | PED Relevant Case Study / PED Lab | Compare |
| Klimatkontrakt Hyllie, Malmö | PED Relevant Case Study | Compare | |
| EnStadt:Pfaff, Kaiserslautern | PED Relevant Case Study / PED Lab | Compare | |
| mySMARTlife, Helsinki | PED Relevant Case Study | Compare | |
| REPLICATE (pilot action in the Novoli-Cascine district on “le PIagge” buildings), Firenze | PED Relevant Case Study | Compare | |
| Sinfonia, Bolzano | PED Relevant Case Study | Compare | |
| Hunziker Areal, Zürich | PED Relevant Case Study | Compare | |
| Hammarby Sjöstad 2.0, | PED Relevant Case Study | Compare | |
| Sharing Cities, Milano | PED Relevant Case Study | Compare | |
| District Heating Pozo Barredo, Mieres | PED Relevant Case Study | Compare | |
| Cityfied (demo Linero), Lund | PED Relevant Case Study | Compare | |
| Smart Otaniemi, Espoo | PED Relevant Case Study / PED Lab | Compare | |
| Zukunftsquartier, Vienna | PED Case Study | Compare | |
| Santa Chiara Open Lab, Trento | PED Case Study | Compare | |
| Barrio La Pinada, Paterna | PED Case Study / PED Lab | Compare | |
| Zero Village Bergen (ZVB) | ZEN – Research Centre on Zero Emission Neighbourhoods in Smart Cities | PED Case Study | Compare |
| Võru +CityxChange | PED Case Study | Compare | |
| NTNU Campus within the Knowledge Axis, Trondheim | ZEN – Research Centre on Zero Emission Neighbourhoods in Smart Cities | PED Case Study | Compare |
| Furuset project, Oslo | ZEN – Research Centre on Zero Emission Neighbourhoods in Smart Cities | PED Case Study | Compare |
| Laser Valley – Land of Lights | PED Case Study | Compare | |
| Ydalir project | ZEN – Research Centre on Zero Emission Neighbourhoods in Smart Cities | PED Case Study | Compare |
| NyBy – Ny Flyplass (New City – New Airport) | ZEN – Research Centre on Zero Emission Neighbourhoods in Smart Cities | PED Case Study | Uncompare |
| Fornebu, Bærum | ZEN – Research Centre on Zero Emission Neighbourhoods in Smart Cities | PED Case Study | Compare |
| Fleuraye west, Carquefou | PED Case Study | Compare | |
| Smart Energy Åland | PED Case Study | Compare | |
| Romania, Alba Iulia PED | ASCEND – Accelerate poSitive Clean ENergy Districts | PED Case Study | Compare |
| Romania, Alba Iulia PED | InterPED – INTERoperable cloud-based solution for cross-vector planning and management of Positive Energy Districts | PED Case Study | Compare |
| Munich, Harthof district | PED Case Study | Compare | |
| Lublin | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Roubaix, MustBe0 – Résidence Philippe le Hardi – 125 Rue d’Oran | CULTURAL-E – Climate and cultural-based solutions for Plus Energy Buildings | PED Relevant Case Study | Compare |
| Bærum, Eiksveien 116 | CULTURAL-E – Climate and cultural-based solutions for Plus Energy Buildings | PED Relevant Case Study | Compare |
| Findhorn, the Park | InterPED – INTERoperable cloud-based solution for cross-vector planning and management of Positive Energy Districts | PED Case Study | Compare |
| Amsterdam, Buiksloterham PED | ATELIER – AmsTErdam BiLbao cItizen drivEn smaRt cities | PED Case Study | Compare |
| Schönbühel-Aggsbach, Schönbühel an der Donau | PED-ACT – Auto characterization of PEDs for digital references towards iterative process optimisation | PED Relevant Case Study | Compare |
| Umeå, Ålidhem district | PED-ACT – Auto characterization of PEDs for digital references towards iterative process optimisation | PED Case Study | Compare |
| Aalborg East | PED Relevant Case Study / PED Lab | Compare | |
| Ankara, Çamlık District | PED-ACT – Auto characterization of PEDs for digital references towards iterative process optimisation | PED Case Study / PED Relevant Case Study | Compare |
| Trenčín | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Luxembourg, Betzdorf | LEGOFIT – Adaptable technological solutions based on early design actions for the construction and renovation of Energy Positive Homes | PED Relevant Case Study | Compare |
| Vantaa, Aviapolis | NEUTRALPATH – Pathway towards Climate-Neutrality through low risky and fully replicable Positive Clean Energy Districts | PED Case Study / PED Relevant Case Study / PED Lab | Compare |
| Vidin, Himik and Bononia | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Oslo, Verksbyen | Syn.ikia – Sustainable Plus Energy Neighbourhoods | PED Case Study | Compare |
| Uden, Loopkantstraat | Syn.ikia – Sustainable Plus Energy Neighbourhoods | PED Relevant Case Study | Uncompare |
| Zaragoza, Actur | NEUTRALPATH – Pathway towards Climate-Neutrality through low risky and fully replicable Positive Clean Energy Districts | PED Relevant Case Study | Compare |
| Aarhus, Brabrand | BIPED – Building Intelligent Positive Energy Districts | PED Case Study / PED Relevant Case Study / PED Lab | Compare |
| Riga, Ķīpsala, RTU smart student city | ExPEDite – Enabling Positive Energy Districts through Digital Twins | PED Case Study | Compare |
| Izmir, District of Karşıyaka | PED-ACT – Auto characterization of PEDs for digital references towards iterative process optimisation | PED Case Study | Compare |
| Istanbul, Ozyegin University Campus | LEGOFIT – Adaptable technological solutions based on early design actions for the construction and renovation of Energy Positive Homes | PED Relevant Case Study | Compare |
| Espoo, Kera | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Case Study / PED Relevant Case Study | Compare |
| Borlänge, Rymdgatan’s Residential Portfolio | PED-ACT – Auto characterization of PEDs for digital references towards iterative process optimisation | PED Relevant Case Study | Compare |
| Freiburg, Waldsee | PED urban – Development of methods and tools for accounting, planning and operation of climate-neutral district | PED Case Study | Compare |
| Innsbruck, Campagne-Areal | PED Relevant Case Study | Compare | |
| Graz, Reininghausgründe | PED Case Study | Uncompare | |
| Stor-Elvdal, Campus Evenstad | ZEN – Research Centre on Zero Emission Neighbourhoods in Smart Cities | PED Relevant Case Study | Compare |
| Oulu, Kaukovainio | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Halmstad, Fyllinge | PED Relevant Case Study | Compare | |
| Lund, Brunnshög district | PED Case Study | Compare | |
| Vienna, Am Kempelenpark | PED Case Study | Compare | |
| Évora, Portugal | POCITYF – A POsitive Energy CITY Transformation Framework | PED Relevant Case Study / PED Lab | Compare |
| Kladno, Sletiště (Sport Area), PED Winter Stadium | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Relevant Case Study | Compare |
| Groningen, PED South | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Lab | Compare |
| Groningen, PED North | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Lab | Compare |
| Maia, Sobreiro Social Housing | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Lab | Compare |
| Lubia (Soria), CEDER-CIEMAT | PED Lab | Uncompare | |
| Tampere, Ilokkaanpuisto district | STARDUST – Holistic and Integrated Urban Model for Smart Cities | PED Relevant Case Study | Compare |
| Leon, Former Sugar Factory district | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Istanbul, Kadikoy district, Caferaga | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Espoo, Leppävaara district, Sello center | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Case Study | Compare |
| Espoo, Espoonlahti district, Lippulaiva block | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Case Study | Compare |
| Salzburg, Gneis district | Syn.ikia – Sustainable Plus Energy Neighbourhoods | PED Case Study | Compare |
| Barcelona, Santa Coloma de Gramenet | Syn.ikia – Sustainable Plus Energy Neighbourhoods | PED Case Study | Compare |
| Tartu, City centre area | SmartEnCity – Towards Smart Zero CO2 Cities across Europe | PED Relevant Case Study / PED Lab | Compare |
| Bologna, Pilastro-Roveri district | GRETA – GReen Energy Transition Actions | PED Relevant Case Study | Uncompare |
| Barcelona, SEILAB & Energy SmartLab | PED Lab | Uncompare | |
| Leipzig, Baumwollspinnerei district | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Case Study | Uncompare |
| Kifissia, Energy community | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Relevant Case Study |
| Title | Kifissia, Energy community | Barcelona, SEILAB & Energy SmartLab | Bologna, Pilastro-Roveri district | Lubia (Soria), CEDER-CIEMAT | Leipzig, Baumwollspinnerei district | Uden, Loopkantstraat | Graz, Reininghausgründe | NyBy – Ny Flyplass (New City – New Airport) |
|---|---|---|---|---|---|---|---|---|
| A1P001: Name of the PED case study / PED Lab | ||||||||
| A1P001: Name of the PED case study / PED Lab | Kifissia, Energy community | Barcelona, SEILAB & Energy SmartLab | Bologna, Pilastro-Roveri district | Lubia (Soria), CEDER-CIEMAT | Leipzig, Baumwollspinnerei district | Uden, Loopkantstraat | Graz, Reininghausgründe | NyBy – Ny Flyplass (New City – New Airport) |
| A1P002: Map / aerial view / photos / graphic details / leaflet | ||||||||
| A1P002: Map / aerial view / photos / graphic details / leaflet |
|
|
|
| ||||
| A1P003: Categorisation of the PED site | ||||||||
| PED case study | no | no | no | no | yes | no | yes | yes |
| PED relevant case study | yes | no | yes | no | no | yes | no | no |
| PED Lab. | no | yes | no | yes | no | no | no | no |
| A1P004: Targets of the PED case study / PED Lab | ||||||||
| Climate neutrality | no | no | yes | no | yes | yes | yes | yes |
| Annual energy surplus | no | no | no | no | no | yes | no | no |
| Energy community | yes | yes | yes | no | no | no | no | no |
| Circularity | no | no | no | no | no | no | no | no |
| Air quality and urban comfort | yes | no | no | yes | yes | no | no | no |
| Electrification | yes | yes | no | no | yes | yes | no | no |
| Net-zero energy cost | no | no | no | no | no | no | no | no |
| Net-zero emission | no | yes | no | yes | no | no | no | yes |
| Self-sufficiency (energy autonomous) | no | yes | no | yes | no | no | no | no |
| Maximise self-sufficiency | no | no | no | no | no | no | no | no |
| Other | no | yes | no | no | yes | no | no | yes |
| Other (A1P004) | Green IT | Net-zero emission; Annual energy surplus | Energy efficient; Sustainable neighbourhood; Social aspects/affordability | |||||
| A1P005: Phase of the PED case study / PED Lab | ||||||||
| A1P005: Project Phase of your case study/PED Lab | Planning Phase | In operation | Planning Phase | Implementation Phase | Implementation Phase | In operation | Implementation Phase | Planning Phase |
| A1P006: Start Date | ||||||||
| A1P006: Start date | 01/2011 | 09/19 | 11/19 | 06/17 | 2019 | 01/20 | ||
| A1P007: End Date | ||||||||
| A1P007: End date | 02/2013 | 10/23 | 12/23 | 05/23 | 2025 | |||
| A1P008: Reference Project | ||||||||
| A1P008: Reference Project | ||||||||
| A1P009: Data availability | ||||||||
| A1P009: Data availability |
|
|
|
| ||||
| A1P009: Other | ||||||||
| A1P010: Sources | ||||||||
| Any publication, link to website, deliverable referring to the PED/PED Lab |
|
|
|
| ||||
| A1P011: Geographic coordinates | ||||||||
| X Coordinate (longitude): | 23.814588 | 2.1 | 11.397323 | -2.508 | 12.318458 | 5.6191 | 15.407440 | 14.363169 |
| Y Coordinate (latitude): | 38.077349 | 41.3 | 44.507106 | 41.603 | 51.326492 | 51.6606 | 47.0607 | 67.271954 |
| A1P012: Country | ||||||||
| A1P012: Country | Greece | Spain | Italy | Spain | Germany | Netherlands | Austria | Norway |
| A1P013: City | ||||||||
| A1P013: City | Municipality of Kifissia | Barcelona and Tarragona | Bologna | Lubia - Soria | Leipzig | Uden | Graz | Bodø |
| A1P014: Climate Zone (Köppen Geiger classification) | ||||||||
| A1P014: Climate Zone (Köppen Geiger classification). | Csa | Csa | Cfa | Cfb | Dfb | Cfb | Dfb | Dfc |
| A1P015: District boundary | ||||||||
| A1P015: District boundary | Virtual | Virtual | Geographic | Geographic | Functional | Geographic | Geographic | |
| Other | The energy will be produced by a PV plant installed on the terrace of a municipal building. Members of the energy community (that is under formation) will benefit from the energy produced via virtual net metering. PV instalment and the buildings (owned by the members of the community) will be within the boundaries of the Municipality but not necessary in the same area/district/neighbourhood | Geographic | ||||||
| A1P016: Ownership of the case study/PED Lab | ||||||||
| A1P016: Ownership of the case study/PED Lab: | Public | Mixed | Public | Private | Mixed | Public | ||
| A1P017: Ownership of the land / physical infrastructure | ||||||||
| A1P017: Ownership of the land / physical infrastructure: | Single Owner | Multiple Owners | Single Owner | Single Owner | Multiple Owners | Single Owner | ||
| A1P018: Number of buildings in PED | ||||||||
| A1P018: Number of buildings in PED | 0 | 1962 | 6 | 2 | 1 | 100 | ||
| A1P019: Conditioned space | ||||||||
| A1P019: Conditioned space [m²] | 17000 | 2360 | ||||||
| A1P020: Total ground area | ||||||||
| A1P020: Total ground area [m²] | 7800000 | 6400000 | 30000 | 3860 | 1000000 | 3400000 | ||
| A1P021: Floor area ratio: Conditioned space / total ground area | ||||||||
| A1P021: Floor area ratio: Conditioned space / total ground area | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 |
| A1P022: Financial schemes | ||||||||
| A1P022a: Financing - PRIVATE - Real estate | no | no | no | no | no | yes | yes | no |
| A1P022a: Add the value in EUR if available [EUR] | 7804440 | |||||||
| A1P022b: Financing - PRIVATE - ESCO scheme | no | no | no | no | no | no | no | no |
| A1P022b: Add the value in EUR if available [EUR] | ||||||||
| A1P022c: Financing - PRIVATE - Other | no | no | no | no | no | no | no | no |
| A1P022c: Add the value in EUR if available [EUR] | ||||||||
| A1P022d: Financing - PUBLIC - EU structural funding | no | no | no | no | no | no | no | no |
| A1P022d: Add the value in EUR if available [EUR] | ||||||||
| A1P022e: Financing - PUBLIC - National funding | no | no | yes | no | no | no | yes | no |
| A1P022e: Add the value in EUR if available [EUR] | ||||||||
| A1P022f: Financing - PUBLIC - Regional funding | no | no | yes | no | no | no | no | no |
| A1P022f: Add the value in EUR if available [EUR] | ||||||||
| A1P022g: Financing - PUBLIC - Municipal funding | no | no | yes | no | no | no | yes | no |
| A1P022g: Add the value in EUR if available [EUR] | ||||||||
| A1P022h: Financing - PUBLIC - Other | no | no | no | no | no | no | no | no |
| A1P022h: Add the value in EUR if available [EUR] | ||||||||
| A1P022i: Financing - RESEARCH FUNDING - EU | no | no | yes | no | no | no | no | no |
| A1P022i: Add the value in EUR if available [EUR] | ||||||||
| A1P022j: Financing - RESEARCH FUNDING - National | no | no | no | yes | no | no | no | no |
| A1P022j: Add the value in EUR if available [EUR] | ||||||||
| A1P022k: Financing - RESEARCH FUNDING - Local/regional | no | no | yes | yes | no | no | no | no |
| A1P022k: Add the value in EUR if available [EUR] | ||||||||
| A1P022l: Financing - RESEARCH FUNDING - Other | no | no | no | no | no | no | no | no |
| A1P022l: Add the value in EUR if available [EUR] | ||||||||
| A1P022: Other | ||||||||
| A1P023: Economic Targets | ||||||||
| A1P023: Economic Targets |
|
|
|
| ||||
| A1P023: Other | Sustainable and replicable business models regarding renewable energy systems | |||||||
| A1P024: More comments: | ||||||||
| A1P024: More comments: | Semi-Virtual Energy Integration Laboratory (SEILAB) The Energy Smart Lab is an infrastructure conceived as a flexible and versatile platform for innovative technological developments for both industry and competitive R+D projects. The areas of expertise of this laboratory pivot around the following technologies: – Power Electronics for the integration and control of the elements within a building or community: Renewable Energy Sources (RES), Energy Storage Systems and Electric Vehicles (EV) – ICT Platform for smart communications and energy management of systems, building, networks and communities. – Energy System Integration technologies for smart and flexible buildings and grids including RES and EV. The laboratory operation is based on the hardware emulation approach, which allows for real physical equipment to be operated under a broad range of scenarios without depending on the real occurrence of the boundary conditions suitable for the experimental validation. The laboratory is pioneer in addressing the concept and implementation of Microgrids and aims to become a leading experimental facility for improving the optimal development of Flexible Energy Buildings and Flexibility Aggregation. | The Pilastro-Roveri area is a large peri-urban district in the northeast of the city of Bologna (about 650 hectares). In particular, the northern area is mainly characterised by the residential sector of Rione Pilastro, a significant complex of social housing built in the 1960s in response to the housing emergency due to migrations from southern Italy and nowadays satisfying more global migrations. The southern area is instead characterised by the presence of the production district called Roveri. The area appears relevant for the research as it has several evolution potentials towards a climate-neutral district. In particular some key factors are interesting: - the presence of one of the largest photovoltaic parks in Europe on the roofs of CAAB, characterised by a production of 11,350,000 Kw/h of primary energy; - the presence of companies attentive to the issues of climate change and energy, able to act as facilitators for the area. This is the case of FIVE, a leader in the production of electric bicycles, whose plant is the first nZEB (nearly Zero Energy Building) productive building in the city; - the high presence of industrial buildings of different sizes needing a reduction in energy consumption; - the presence of obsolete, sometimes in decay, and of general highly energy-intensive buildings in the Pilastro area, accompanied by spread phenomena of energy poverty; - the presence of spaces that could be converted (e.g. unused warehouses, unexploited green areas, etc.); - the presence of an active community, characterised by numerous associations, but also by social challenges linked to multiple vulnerabilities; - the presence of local actors interested in the development of the area (including the Municipality, the University, Confindustria, ENEA, Confartigianato, etc.). Two main research projects are actually ongoing in the area, applying solutions towards energy improvement and transition strategies to guide the area towards climate neutrality: - GECO - Green Energy Community, funded by EIT Climate-KIC and active since 2019, aims to trigger a virtuous path of energy sharing between companies and citizens through the creation of an energy community. - GRETA - Green Energy Transition Actions, funded by the H2020 programme, aims to understand drivers and barriers on the involvement of citizens in the energy transition processes, by formulating Community Transition Pathways and Energy Citizenship Contracts. [from: Boeri, A., Boulanger, S., Turci, G., Pagliula, S. (2021) Strategie e tecnologie abilitanti per PED misti: efficienza tra smart cities e industria 4.0. TECHNE, 22, 180-190] | The Centre for the Development of Renewable Energy (CEDER)is specialized in applied research, development and promotion of renewable energy. Among the facilities of this Centre, the urban laboratory CEDER-CIEMAT assess the performance of different configurations of energy networks at the district level. This PED-Lab infrastructure is an energy district that connects six office buildings with energy generation installations by means of two energy rings: electrical grid (in operation phase) and thermal network (in the implementation phase). The buildings of this PED Lab can act as energy demanders or suppliers depending on the climatic and operational conditions. The majority of these buildings are constructed with conventional technologies but some of them are implemented with efficient and sustainable measures. The thermal network is composed by two biomass boilers, 300 kW power each, and water tanks with 90 kWh of thermal storage. This network will shortly be expanded with a low temperature (90°C) and high temperature (150°-250°C) rings. The low-temperature ring is made up by two Stirling engine cogeneration boilers (one biomass gasification boiler and one gas boiler). The high-temperature ring has a thermal generator made up of Fresnel solar concentrators and an ORC cogeneration system fed directly from the solar concentrator. The high-temperature ring is interconnected with the low-temperature ring through an oil/water heat exchanger. This network has thermal storage systems in the modalities of: aquifers, boreholes, phase change materials, cold storage with geothermal exchange ground recovery and thermal storage at very low temperature with zeolites. The electrical grid incorporates different renewable generation technologies (50 kW wind turbine and eight different photovoltaic systems, a reversible hydraulic system), and engine generator of 100 kVA, electricity storages (batteries) and flexible loads. | The project is a follow-up from the “Social Beautiful” concept which was developed in collaboration between Labyrint (Support in sheltered housing), Area (housing company), the municipality of Uden, and Hendriks Coppelmans (developer). The concept aims to provide an answer to changes in various policy areas and the changing demands of society. The Social Beautiful concept consists of the following elements: 1. Living, working, and community services are brought together in one location. A multifunctional residential and service centre is being realized at the location. 2. Housing is shaped by the realization of financially accessible homes suitable for the target group. The housing design is tailored to the target group. it may also include sheltered / protected living. 3. Work takes place at the location or from the same location. The work has a social function within the neighbourhood. Wage-related work must contribute to providing structure in the daily activities of the residents. 4. Neighbourhood management is organized from the location in the surrounding neighbourhood. A service package is provided from the residential and service centre that contributes to the ability of neighbourhood residents to live independently for longer, to strengthen the social network, and to improve the quality of life and safety in the neighbourhood. 5. The houses are suitable for use at all times for regular rental. Communal facilities must be realized within the contours of a regular apartment. The objective is to offer a suitable living and working situation to a group of vulnerable citizens. In this way they become a fully-fledged part of society. They not only make use of the facilities themselves, but also give substance to the level of facilities in the municipality. Due to the integrated approach, they experience a greater sense of well-being and security. | The “Reininghausgründe” are a new quarter near the centre of the City of Graz. In the area of a former brewery, close to more, still working industries, a new town centre is being established. It will include living areas, workplaces, shops, schools and a park, so that the need for individual mobility is minimized. It is connected to the city centre by bike paths, busses and a tram. Car sharing is provided as well. Some key-energy aspects: • characteristic 1: For the heat supply in the innovative Reininghaus energy model, low-temperature waste heat from a nearby steel plant is harnessed through the use of heat pumps. • characteristic 2: The district heating system operates at low temperatures. • characteristic 3: Generated heat that is not used immediately is stored in the power tower and supplied on demand. Other important aspects of the project are the following: • characteristic 1: Most houses are low-energy houses, some of the certified with the “Klima Aktiv” label • characteristic 2: There are extremely few parking possibilities for residents and visitors; this will foster the use of public transport and bikes • characteristic 3: All the necessary infrastructure for the “daily need” can be reached within walking distance The area of the project is going to be very “green” when finished. Featuring a big district parc, lots of other green spaces are in planning. | |||
| A1P025: Estimated PED case study / PED LAB costs | ||||||||
| A1P025: Estimated PED case study / PED LAB costs [mil. EUR] | 7804440 | |||||||
| Contact person for general enquiries | ||||||||
| A1P026: Name | Artemis Giavasoglou, Kleopatra Kalampoka | Dr. Jaume Salom, Dra. Cristina Corchero | Prof. Danila Longo | Dr. Raquel Ramos | Simon Baum | Tonje Healey Trulsrud | Katharina Schwarz | Christoph Gollner |
| A1P027: Organization | Municipality of Kifissia – SPARCS local team | IREC | University of Bologna - Architecture Department | Centre for the Development of Renewable Energy (CEDER) - Centre for Energy, Environment and Technology Research (CIEMAT) | CENERO Energy GmbH | Norwegian University of Science and Technology (NTNU) | StadtLABOR, Innovationen für urbane Lebensqualität GmbH | FFG |
| A1P028: Affiliation | Municipality / Public Bodies | Research Center / University | Research Center / University | Research Center / University | Other | Research Center / University | SME / Industry | Other |
| A1P028: Other | CENERO Energy GmbH | |||||||
| A1P029: Email | giavasoglou@kifissia.gr | Jsalom@irec.cat | raquel.ramos@ciemat.es | sib@cenero.de | tonje.h.trulsrud@ntnu.no | katharina.schwarz@stadtlaborgraz.at | christoph.gollner@ffg.at | |
| Contact person for other special topics | ||||||||
| A1P030: Name | Stavros Zapantis - vice mayor | Dr. Oscar Seco | Simon Baum | Hans Schnitzer | ||||
| A1P031: Email | stavros.zapantis@gmail.com | oscar.seco@ciemat.es | sib@cenero.de | hans.schnitzer@stadtlaborgraz.at | ||||
| Pursuant to the General Data Protection Regulation | Yes | Yes | Yes | Yes | Yes | Yes | ||
| A2P001: Fields of application | ||||||||
| A2P001: Fields of application |
|
|
|
|
|
|
|
|
| A2P001: Other | Urban Management; Air Quality | |||||||
| A2P002: Tools/strategies/methods applied for each of the above-selected fields | ||||||||
| A2P002: Tools/strategies/methods applied for each of the above-selected fields | Energy SmartLab capacities - Building simulation model: thermal inertia and thermal loads of a building or community can be co-simulated with a building model. – System Operator and Aggregator simulation models: the interaction with remote control actions carried out by electricity System Operators or flexibility Aggregators can be simulated as well. – Grid simulation model: the physical interaction of the building with the grid power supply can be simulated enabling the experimental validation of flexibility services to the network. Energy SmartLab systems - SAFT Li-ion battery: maximum stored energy 20000 Wh, rated power 150 kW, rated discharge current 200 A, rated charge current 34 A, operating voltage 189 V – 227 V – 254 V, capacity 82 Ah. – Ultracapacitors: maximum stored energy 57 Wh, rated power 10 kW, rated current 20 A, peak current (<1s) 200 Apk, operating voltage 250 V – 500 V, capacity 1,65 F. – Electric vehicle second life battery: maximum stored energy 23300 Wh, rated power 40 kW, rated current 150 A, operating voltage 240 V – 400 V, capacity 32 Ah - 5 microgrid emulators (emulated power 5.5 kVA, max generation connected 10kVA, max consumption connected 10 kVA) - 1 grid emulator (Rated power: 200 kVA, Rated current per phase: 350 A, Rated current per neutral conductor: 35) | Energy efficiency: - buildings energy retrofit supported by tax incentives (110%, façade bonus, eco-bonus, sismabonus, renovation bonus, etc.); - several activities - such as Workshops, Webinars, Roundtables, Urban Trekking, etc…- are encouraged in the area to deepen knowledge and raise awareness on energy issues among urban stakeholders (householders, occupants, workers, etc..); - reduction in energy consumption also through every day energy saving actions. The spread of energy poverty phenomena in the area is considered urgent both for the medium-low-income population living in Pilastro and for small and medium-sized enterprises placed in Roveri; - Project for a One-stop-shop to guide residents and enterprises towards more conscious energy behaviours (planned in Bologna SECAP). Energy production: - installation of new photovoltaic (PV) systems for renewable on-site energy production; - presence of a waste to energy plant connected to the district heating system; - presence of a large PV plant in the CAAB area - 11,350,000 Kw/h Energy flexibility: - testing energy community and collective self-consumption feasibility in Pilastro area through an active citizens involvement process; - testing energy community feasibility among SMEs in Roveri industrial area; - testing the potential of complementary energy consumption profiles between residential area (Pilastro) and industrial area (Roveri). Digital technologies: - smart-meters installation in some dwellings in order to monitor consumption and suggest more sustainable energy behaviors; - Blog Pilastro as a tool to inform about the main activities and events ongoing in the area; E-mobility - Installation of new charging stations for electric vehicles; - e-bike/bikesharing services recovery (in fact during Covid-19 in the area Mobike service was suspended) and implementation. Urban comfort and air quality - Control units for air pollutants concentration (PM2.5, PM10, NO2); - Microclimatic simulation | Energy efficiency: - Buildings energy retrofit. Energy production: - Biomass Boiler capacity: 0.6 MW. Annual production: 1.2 GWh - Solar thermal collectors: 70 kW, planned extended to: 0.47MW - Geotermal & Absorption Pumps: 100 kW - Share of renewables after extension: 100% (30% solar thermal and 70% biomass) - AOC 50kW wind turbine. Awaiting installation of a two-way AC-AC converter for subsequent connection to the grid - Bornay Inclin 3 kW wind turbine, connected to 24 Vdc batteries, to be connected to the grid by means of Xantrex inverter/charger - 9kW photovoltaic park (66PV panels, brand BP Solar,type BP5140,of 140W) connected to the grid by means of two INGECON SUN 5 inverters - 5kW photovoltaic pergola (24PV panels, brand Solon, type P200, of 210W) connected to the grid by means of one INGECON SUN 5 inverter - 8.28kW photovoltaic roof (36PV panels, Brand LDK, type LDK-230P-20), connected to the grid by means of one INGECONSUN 10 inverter - 12kW photovoltaic roof (80PV panels, brand Gamesa, type GS-1501), connected to the grid. - Reversible hydraulic system connected to a 60 kW electric generator and a pumping system. -Stirling engine with a heat lamp based on natural gas, a helium cool lamp, 10kWe maximum power delivered and global performance of approximately 33%. Energy flexibility: - Thermal storage systems: water tanks 90kW, aquifers, boreholes, phase change materials, cold storage with geothermal exchange ground recovery and thermal storage at very low temperature with zeolites. - Electrical storage systems: batteries (lead-acid and lithium-ion). - Flexible loads. Control systems and Digital technologies: - Full monitoring campaign. - Smart-meters installation to monitor consumption and suggest another energy behaviours. - Dynamic simulation tools to optimize the energy performance. Urban comfort and air quality: - Meteorological stations to monitor the climate evolution. - Microclimatic simulation tools to quantify the thermal behaviour. | Energy efficiency: Energy efficient envelope, with good insulation, triple glazing windows and airtight envelope. (EPC = 0) Energy Flexibility: MCP controls for the heat pump in the apartments. Energy production: PV panels on the roof, Ground source heat pumps Waste management: construction waste was kept to a minimum and sorted and collected separately as much as possible. Indoor air quality: Exhaust ventilation and opening of windows Construction materials: low carbon emission building materials | Energy efficiency: o Several activities: Workshops, Webinars to deepen the knowledge and raise awareness renewable energies o for example rooftop Photovoltaics green & blue infrastructures o Parks, Rooftop Gardens, Quarter Parks, Water elements included in the parks rooftop farming o To produce vegetables in the quarter stormwater management mobility o less parking and less cars in the district. Solutions for boosting public transport with sponsored public transport tickets; building of better bike and pedestrian infrastructure social aspects o district management was established in the district local supply of goods of daily need o Schools within 15 minutes walking distance Supermarkets and other shops within the district | |||
| A2P003: Application of ISO52000 | ||||||||
| A2P003: Application of ISO52000 | Yes | No | Yes | No | ||||
| A2P004: Appliances included in the calculation of the energy balance | ||||||||
| A2P004: Appliances included in the calculation of the energy balance | Yes | No | Yes | No | Yes | |||
| A2P005: Mobility included in the calculation of the energy balance | ||||||||
| A2P005: Mobility included in the calculation of the energy balance | Yes | No | No | No | Yes | |||
| A2P006: Description of how mobility is included (or not included) in the calculation | ||||||||
| A2P006: Description of how mobility is included (or not included) in the calculation | – Electric vehicle second life battery: maximum stored energy 23300 Wh, rated power 40 kW, rated current 150 A, operating voltage 240 V – 400 V, capacity 32 Ah | not included | - Number of cars per household - Fraction of electric cars - Number of public transport tickets (week/ annual tickets) | |||||
| A2P007: Annual energy demand in buildings / Thermal demand | ||||||||
| A2P007: Annual energy demand in buildings / Thermal demand [GWh/annum] | 1.65 | 0.148 | ||||||
| A2P008: Annual energy demand in buildings / Electric Demand | ||||||||
| A2P008: Annual energy demand in buildings / Electric Demand [GWh/annum] | 0.109 | |||||||
| A2P009: Annual energy demand for e-mobility | ||||||||
| A2P009: Annual energy demand for e-mobility [GWh/annum] | 0 | |||||||
| A2P010: Annual energy demand for urban infrastructure | ||||||||
| A2P010: Annual energy demand for urban infrastructure [GWh/annum] | ||||||||
| A2P011: Annual renewable electricity production on-site during target year | ||||||||
| A2P011: PV | yes | yes | yes | yes | yes | yes | yes | no |
| A2P011: PV - specify production in GWh/annum [GWh/annum] | 0.058 | |||||||
| A2P011: Wind | no | no | no | yes | no | no | no | no |
| A2P011: Wind - specify production in GWh/annum [GWh/annum] | ||||||||
| A2P011: Hydro | no | no | no | yes | no | no | no | no |
| A2P011: Hydro - specify production in GWh/annum [GWh/annum] | ||||||||
| A2P011: Biomass_el | no | no | no | yes | no | no | no | no |
| A2P011: Biomass_el - specify production in GWh/annum [GWh/annum] | ||||||||
| A2P011: Biomass_peat_el | no | no | no | no | no | no | no | no |
| A2P011: Biomass_peat_el - specify production in GWh/annum [GWh/annum] | ||||||||
| A2P011: PVT_el | no | no | no | no | no | no | no | no |
| A2P011: PVT_el - specify production in GWh/annum [GWh/annum] | ||||||||
| A2P011: Other | no | no | no | no | no | no | no | no |
| A2P011: Other - specify production in GWh/annum [GWh/annum] | ||||||||
| A2P012: Annual renewable thermal production on-site during target year | ||||||||
| A2P012: Geothermal | no | no | no | yes | no | yes | yes | no |
| A2P012 - Geothermal: Please specify production in GWh/annum [GWh/annum] | ||||||||
| A2P012: Solar Thermal | no | no | yes | yes | no | no | yes | no |
| A2P012 - Solar Thermal: Please specify production in GWh/annum [GWh/annum] | ||||||||
| A2P012: Biomass_heat | no | no | yes | yes | no | no | no | no |
| A2P012 - Biomass_heat: Please specify production in GWh/annum [GWh/annum] | ||||||||
| A2P012: Waste heat+HP | no | no | no | yes | no | no | yes | no |
| A2P012 - Waste heat+HP: Please specify production in GWh/annum [GWh/annum] | ||||||||
| A2P012: Biomass_peat_heat | no | no | no | no | no | no | no | no |
| A2P012 - Biomass_peat_heat: Please specify production in GWh/annum [GWh/annum] | ||||||||
| A2P012: PVT_th | no | no | no | no | no | no | no | no |
| A2P012 - PVT_th: Please specify production in GWh/annum [GWh/annum] | ||||||||
| A2P012: Biomass_firewood_th | no | no | no | yes | no | no | no | no |
| A2P012 - Biomass_firewood_th: Please specify production in GWh/annum [GWh/annum] | ||||||||
| A2P012: Other | no | no | no | no | no | no | no | no |
| A2P012 - Other: Please specify production in GWh/annum [GWh/annum] | ||||||||
| A2P013: Renewable resources on-site - Additional notes | ||||||||
| A2P013: Renewable resources on-site - Additional notes | *Annual energy use below is presentedin primary energy consumption | Groundwater (used for heat pumps) | ||||||
| A2P014: Annual energy use | ||||||||
| A2P014: Annual energy use [GWh/annum] | 2.421 | 0.194 | ||||||
| A2P015: Annual energy delivered | ||||||||
| A2P015: Annual energy delivered [GWh/annum] | 0.0368 | |||||||
| A2P016: Annual non-renewable electricity production on-site during target year | ||||||||
| A2P016: Annual non-renewable electricity production on-site during target year [GWh/annum] | ||||||||
| A2P017: Annual non-renewable thermal production on-site during target year | ||||||||
| A2P017: Gas | no | yes | no | no | no | no | no | no |
| A2P017 - Gas: Annual non-renewable thermal production on-site during target year [GWh/annum] | ||||||||
| A2P017: Coal | no | no | no | no | no | no | no | no |
| A2P017 - Coal: Annual non-renewable thermal production on-site during target year [GWh/annum] | ||||||||
| A2P017: Oil | no | no | no | no | no | no | no | no |
| A2P017 - Oil: Annual non-renewable thermal production on-site during target year [GWh/annum] | ||||||||
| A2P017: Other | no | no | no | no | no | no | no | no |
| A2P017 - Other: Annual non-renewable thermal production on-site during target year [GWh/annum] | ||||||||
| A2P018: Annual renewable electricity imports from outside the boundary during target year | ||||||||
| A2P018: PV | no | no | no | no | no | no | yes | no |
| A2P018 - PV: specify production in GWh/annum if available [GWh/annum] | ||||||||
| A2P018: Wind | no | no | no | no | no | no | yes | no |
| A2P018 - Wind: specify production in GWh/annum if available [GWh/annum] | ||||||||
| A2P018: Hydro | no | no | no | no | no | no | yes | no |
| A2P018 - Hydro: specify production in GWh/annum if available [GWh/annum] | ||||||||
| A2P018: Biomass_el | no | no | no | no | no | no | no | no |
| A2P018 - Biomass_el: specify production in GWh/annum if available [GWh/annum] | ||||||||
| A2P018: Biomass_peat_el | no | no | no | no | no | no | no | no |
| A2P018 - Biomass_peat_el: specify production in GWh/annum if available [GWh/annum] | ||||||||
| A2P018: PVT_el | no | no | no | no | no | no | no | no |
| A2P018 - PVT_el: specify production in GWh/annum if available [GWh/annum] | ||||||||
| A2P018: Other | no | no | no | no | no | no | no | no |
| A2P018 - Other: specify production in GWh/annum if available [GWh/annum] | ||||||||
| A2P019: Annual renewable thermal imports from outside the boundary during target year | ||||||||
| A2P019: Geothermal | no | no | no | no | no | no | no | no |
| A2P019 Geothermal: Please specify imports in GWh/annum [GWh/annum] | ||||||||
| A2P019: Solar Thermal | no | no | no | no | no | no | yes | no |
| A2P019 Solar Thermal: Please specify imports in GWh/annum [GWh/annum] | ||||||||
| A2P019: Biomass_heat | no | no | no | no | no | no | yes | no |
| A2P019 Biomass_heat: Please specify imports in GWh/annum [GWh/annum] | ||||||||
| A2P019: Waste heat+HP | no | no | no | no | no | no | yes | no |
| A2P019 Waste heat+HP: Please specify imports in GWh/annum [GWh/annum] | ||||||||
| A2P019: Biomass_peat_heat | no | no | no | no | no | no | no | no |
| A2P019 Biomass_peat_heat: Please specify imports in GWh/annum [GWh/annum] | ||||||||
| A2P019: PVT_th | no | no | no | no | no | no | no | no |
| A2P019 PVT_th: Please specify imports in GWh/annum [GWh/annum] | ||||||||
| A2P019: Biomass_firewood_th | no | no | no | no | no | no | no | no |
| A2P019 Biomass_firewood_th: Please specify imports in GWh/annum [GWh/annum] | ||||||||
| A2P019: Other | no | no | no | no | no | no | no | no |
| A2P019 Other: Please specify imports in GWh/annum [GWh/annum] | ||||||||
| A2P020: Share of RES on-site / RES outside the boundary | ||||||||
| A2P020: Share of RES on-site / RES outside the boundary | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| A2P021: GHG-balance calculated for the PED | ||||||||
| A2P021: GHG-balance calculated for the PED [tCO2/annum] | -0.00043 | 0.036 | ||||||
| A2P022: KPIs related to the PED case study / PED Lab | ||||||||
| A2P022: Safety & Security | Personal Safety | |||||||
| A2P022: Health | Healthy community | |||||||
| A2P022: Education | ||||||||
| A2P022: Mobility | Sustainable mobility | x | Mode of transport; Access to public transport | |||||
| A2P022: Energy | apply | NOn-renewable primary energy balance, renewable energy ratio, grid purchase factor, load cover factor/self-generation, supply cover factor/self-consumption, net energy/net power, peak delivered/peak expoted, total greenhouse gas emission | x | Energy efficiency in buildings; Net energy need; Gross energy need; Total energy need | ||||
| A2P022: Water | x | |||||||
| A2P022: Economic development | capital costs, operational cots, overall economic performance (5 KPIs) | x | ||||||
| A2P022: Housing and Community | demographic composition, diverse community, social cohesion | x | Delivery and proximity to amenities | |||||
| A2P022: Waste | ||||||||
| A2P022: Other | Smartness and flecibility, Indoor Environmental Quality, Social performance - Equity (affordable housing, access to servicees and amenitioes, afforability of energy, living conditions, sustinable mobility, universal design) | GHG emissions; Power/load; Life cycle cost (LCC); Demographic needs and consultation plan; Public Space | ||||||
| A2P023: Technological Solutions / Innovations - Energy Generation | ||||||||
| A2P023: Photovoltaics | no | yes | yes | yes | no | yes | yes | no |
| A2P023: Solar thermal collectors | no | no | yes | yes | no | no | no | yes |
| A2P023: Wind Turbines | no | no | no | yes | no | no | no | no |
| A2P023: Geothermal energy system | no | no | yes | yes | no | yes | no | yes |
| A2P023: Waste heat recovery | no | no | no | yes | no | no | yes | yes |
| A2P023: Waste to energy | no | no | yes | no | no | no | no | no |
| A2P023: Polygeneration | no | no | no | yes | no | no | no | no |
| A2P023: Co-generation | no | no | yes | yes | no | no | no | no |
| A2P023: Heat Pump | no | no | yes | yes | no | yes | yes | yes |
| A2P023: Hydrogen | no | no | no | yes | no | no | no | no |
| A2P023: Hydropower plant | no | no | no | yes | no | no | no | no |
| A2P023: Biomass | no | no | no | yes | no | no | no | no |
| A2P023: Biogas | no | no | no | no | no | no | no | no |
| A2P023: Other | ||||||||
| A2P024: Technological Solutions / Innovations - Energy Flexibility | ||||||||
| A2P024: A2P024: Information and Communication Technologies (ICT) | no | yes | yes | yes | no | no | yes | no |
| A2P024: Energy management system | no | yes | no | yes | no | yes | no | no |
| A2P024: Demand-side management | no | no | no | yes | no | yes | no | no |
| A2P024: Smart electricity grid | no | yes | no | yes | no | no | no | no |
| A2P024: Thermal Storage | no | no | no | yes | no | no | yes | no |
| A2P024: Electric Storage | no | yes | yes | yes | no | no | no | no |
| A2P024: District Heating and Cooling | no | no | yes | yes | no | no | yes | yes |
| A2P024: Smart metering and demand-responsive control systems | no | no | no | yes | no | yes | no | no |
| A2P024: P2P – buildings | no | no | no | no | no | no | no | no |
| A2P024: Other | ||||||||
| A2P025: Technological Solutions / Innovations - Energy Efficiency | ||||||||
| A2P025: Deep Retrofitting | no | no | yes | yes | no | no | no | no |
| A2P025: Energy efficiency measures in historic buildings | no | no | no | no | no | no | no | no |
| A2P025: High-performance new buildings | no | no | yes | no | no | yes | yes | no |
| A2P025: Smart Public infrastructure (e.g. smart lighting) | no | no | yes | no | no | no | yes | no |
| A2P025: Urban data platforms | no | no | no | no | no | no | no | no |
| A2P025: Mobile applications for citizens | no | no | yes | no | no | no | yes | no |
| A2P025: Building services (HVAC & Lighting) | no | yes | yes | yes | no | yes | no | no |
| A2P025: Smart irrigation | no | no | no | no | no | no | yes | no |
| A2P025: Digital tracking for waste disposal | no | no | yes | no | no | no | no | no |
| A2P025: Smart surveillance | no | no | yes | no | no | no | no | no |
| A2P025: Other | ||||||||
| A2P026: Technological Solutions / Innovations - Mobility | ||||||||
| A2P026: Efficiency of vehicles (public and/or private) | no | yes | yes | no | no | no | yes | no |
| A2P026: Measures to reduce traffic volume (e.g. measure to support public transportation, shared mobility, measure to reduce journeys and distances) | no | no | yes | no | no | no | yes | no |
| A2P026: e-Mobility | no | no | yes | no | no | no | yes | no |
| A2P026: Soft mobility infrastructures and last mile solutions | no | no | yes | no | no | no | yes | no |
| A2P026: Car-free area | no | no | no | yes | no | no | yes | no |
| A2P026: Other | ||||||||
| A2P027: Mobility strategies - Additional notes | ||||||||
| A2P027: Mobility strategies - Additional notes | Test-Concept for bidirectional charging. | - Multimodal mobility nodes - Support of public transport tickets - Mobility consulting - District management | ||||||
| A2P028: Energy efficiency certificates | ||||||||
| A2P028: Energy efficiency certificates | Yes | Yes | Yes | Yes | ||||
| A2P028: If yes, please specify and/or enter notes | Energy Performance Certificate - in Greece it is mandatory in order to buy or rent a house or a dwelling | Energy Performance Certificate for each dwelling | In Spain it is mandatory the Energy Performance Certificate in order to buy or rent a house or a dwelling | EPC = 0, energy neutral building | Energieausweis mandatory if buildings/ flats/ apartments are sold | |||
| A2P029: Any other building / district certificates | ||||||||
| A2P029: Any other building / district certificates | No | No | No | Yes | ||||
| A2P029: If yes, please specify and/or enter notes | Klimaaktiv standard Voluntary! Certification can be for buildings and/or quarters. The different quarters are built in different standards. Ranging from bronze/silver/gold | |||||||
| A3P001: Relevant city /national strategy | ||||||||
| A3P001: Relevant city /national strategy |
|
|
|
|
| |||
| A3P002: Quantitative targets included in the city / national strategy | ||||||||
| A3P002: Quantitative targets included in the city / national strategy | City level targets Sustainable Urban Mobility Plan (PUMS) - 2019 | Targets: - by 2030 440,000 daily trips will no longer be made by car but on foot, by bike or by public transport; - by 2030 12% of vehicles will be electric; Sustainable Energy and Climate Action Plan (SECAP) - 2021 | Targets: - by 2025 deep renovation of 3% per year of residential homes (insulation of building envelopes and adoption of heat pump heating system); - by 2030 reduction of electricity consumption at least of 20% compared to 2018; - by 2030 100% coverage of electricity consumption for municipal buildings; - by 2030 increase public green areas by at least 10% Urban General Plan (PUG) - 2021 | Targets: - by 2030 net zero land consumption; National level targets Integrated National Energy and Climate Plan - 2020 | Targets: - by 2030 reduction of 43% for primary energy consumption, with respect to the reference 2007 scenario. - by 2030 increase of 30% of energy production from renewable sources; - by 2025 energy generation for electricity independent from the use of coal; | - Testing the combination of renewable technologies at district level. - Optimization of the generation side based on the weather forecasting and demand side. - Optimization of the control system, connected to the central node, to design and perform virtual analyses based on the combination of all the systems and infrastructures. - Optimization of ICT systems. - Design and management of a virtual analysis - Optimization of efficient measures: building performance, user´s behaviour… - Combination of flexible storage systems to operate the global installation. | City level targets Klimaschutzplan Graz - 2022 | Targets: - Climate neutrality until 2040 - Social justice and high quality of life - High innovation levels Mobilitätsplan Graz 2040 – under development | Targets: - Modal Split 80:20 until 2040 80% Public transport, bike, walking | 20% cars Kommunales Energiekonzept (2017) | Targets: - Increase of district heating Energiemasterplan Graz (2018) | Targets: - Energy efficiency of urban dwellings and infrastructures - District heating and solar energy - Energy efficiency of private dwellings - Climate conscious mobility National level targets Klimaschutzplan Österreich -draft, expected by 2024 | Targets: - Decarbonisation (reduction of GHG, renewable energies, - Climate neutrality until 2040 - Energy efficiency - Security of energy supply | |||||
| A3P003: Strategies towards decarbonization of the gas grid | ||||||||
| A3P003: Strategies towards decarbonization of the gas grid |
|
|
|
| ||||
| A3P003: Other | ||||||||
| A3P004: Identification of needs and priorities | ||||||||
| A3P004: Identification of needs and priorities | -Allows for real physical equipment to be operated under a broad range of scenarios without depending on the real occurrence of the boundary conditions suitable for the experimental validation -Pioneer in addressing the concept and implementation of Microgrids and aims to become a leading experimental facility for improving the optimal development of Flexible Energy Buildings and Flexibility Aggregation. | Bologna needs to reach the climate neutrality proceeding by ‘part’ of the city. Pilastro-Roveri is a promising district due to the following reasons: - some buildings need to be renovated both to increase the energy performance, the seismic behaviour, spaces liveability and comfort; - Pilastro is a residential area with the presence of a high percentage of vulnerable inhabitants affected by energy poverty phenomenon. This situation needs to be prioritized; - Pilastro is characterized by the presence of large underused green spaces that can represent a valuable resource for social cohesion and for heat island phenomenon mitigation; - Roveri is an industrial area where some small-medium enterprises are investing in order to improve their facilities and to efficiency their production cycle; - Roveri and Pilastro areas present complementary energy consumption curves throughout the day/week with a high potential for energy sharing and flexibility. | - Create a thermal energy storage tank to be used for air conditioning the buildings. - Some buildings need to be renovated both to increase the energy performance, the seismic behaviour and spaces liveability and comfort. - Optimizing the coupling between technologies. - Guarantee the flexibility to operate the renewable installations to operate in different phases and with different configurations. - CEDER is a public research center and needs to have connected any energy system to the same grid. - CEDER has an industrial develop area where some experimental thermal storage system could be tested. | Reininghaus needs green spaces and places Sector coupling of water, waste water, electricity ICT and demand side management Mobility - Reininghaus needs better infrastructure for bikes and pedestrians - Public transportation should be more affordable and Sharing should be implemented in the district Infrastructure should cover daily needs within walking distance Infrastructure for local jobs and shared offices | ||||
| A3P005: Sustainable behaviour | ||||||||
| A3P005: Sustainable behaviour | -Improving the development of Net Zero Energy Buildings and Flexible Energy buildings. | Bologna SECAP, as well as the participation to the 100 Climate-Neutral Cities, promotes the PED model as an enabling tool to foster city energy transition process. In Pilastro-Roveri district two main sustainable behaviours approaches can be identified: - bottom-up approach - some citizens are joining forces to create groups of energy self-consumption, in view of energy communities’ implementation and, at the same time, some companies have already undertaken some efficiency intervention on the production system by leveraging highly energy-efficient technologies; - top-down approach - GECO and GRETA are international ongoing projects on the area that promote innovation and energy transition with important fundings from the European Union, but with a particular focus on citizen engagement and participatory approach. Simultaneously, new and updated planning tools such as PUG, SECAP and SUMP identify in this part of Bologna city a key area to enable an ecological transition process holding together all relevant stakeholders - citizens, small-medium enterprises and Institutions. These two thrusts (bottom-up and top-down) need to be optimized in view of a participatory pathway towards the grounding of a Positive Energy District in Pilastro-Roveri. | - Minimize the building energy consumption while maintaining indoor comfort levels. - Onsite renewable production with flexible storage elements to fix demand side and generation side. - Flexible control solutions through digitalization systems. | - citizen participation and promotion of functioning neighbourhoods (e.g., through city district management) As of today, solutions for the energy transition in the residential sector have focused on the construction of energy-efficient buildings and on the energy-efficient refurbishment of existing buildings. Measures to influence user behaviour and to directly address residents and neighbourhoods as actors of the energy transition play a minor role and are also not formalized. At the same time, moving into a new apartment offers a ‘window of opportunity’ to establish new everyday practices and behaviour. In already inhabited housing developments, well-functioning neighbourhoods or existing, ‘sustainability pioneers’ are key to motivating people to adopt more resource-efficient lifestyles. In order to prepare such agents of change towards more climate protection and sustainability in the context of housing, Austria launched the BAREWO project. The aim is to develop a kit of formats, methods, and interventions for resource-efficient housing. This toolkit will be tested in six testbeds, among which quarter 12 (Q12) of Graz- Reininghaus, as soon as first residents move in (approx. 2024). Austrian TRANS-PED partner StadtLABOR, which is also a partner in the BAREWO project, will support Q12 in this process. In parallel, a monitoring system will be developed to make the (climate) effects of the kit measurable. In addition, a guideline for property managers will be developed, which will serve as an orientation for them on how their residents can be coached in matters of climate protection and sustainability in everyday (residential) life. From the very beginning, (communication) measures are implemented and relevant stakeholders are involved in the project (project advisory board) to ensure the multiplicability, financing and broad application of the toolkit. If successful, the toolkit could also be scaled up to other quarters in Reininghaus. | ||||
| A3P006: Economic strategies | ||||||||
| A3P006: Economic strategies |
|
|
|
|
| |||
| A3P006: Other | operational savings through efficiency measures | |||||||
| A3P007: Social models | ||||||||
| A3P007: Social models |
|
|
|
|
|
|
| |
| A3P007: Other | ||||||||
| A3P008: Integrated urban strategies | ||||||||
| A3P008: Integrated urban strategies |
|
|
| |||||
| A3P008: Other | ||||||||
| A3P009: Environmental strategies | ||||||||
| A3P009: Environmental strategies |
|
|
|
|
| |||
| A3P009: Other | Positive Energy Balance for the demo site | |||||||
| A3P010: Legal / Regulatory aspects | ||||||||
| A3P010: Legal / Regulatory aspects | - European Commission has legislated on Energy Community (‘Renewable energy’ directive - 2018/2001/EU and ‘Common rules for the internal electricity market’ directive- 2019/944/EU). - Spanish building certification is regulated through Royal Decree 235/2013. | PEDs in Italy are meant as strategies towards climate-neutrality: at national/regional/local level a specific legislation on PEDs development is not yet available. However, the European Commission has legislated on Energy Community (‘Renewable energy’ directive - 2018/2001/EU and ‘Common rules for the internal electricity market’ directive- 2019/944/EU). Italy, starting from 2020, has transposed the Directives at national level (‘Milleproroghe’ decree then made effective by ‘Promotion of Renewable sources’ decree 199/2021). At regional level Emilia Romagna in May 2022 developed a law encouraging EC model diffusion (LR 5/2022 ‘Promotion and support of renewable energy communities and renewable energy self-consumers acting collectively’). Energy Community, according to Lindholm et al. 2021, can be considered as ‘a first implementation step towards PEDs.’ | - European Commission has legislated on Energy Community (Renewable energy directive - 2018/2001/EU and Common rules for the internal electricity market directive- 2019/944/EU). - Spanish building certification is regulated through Royal Decree 235/2013. | Mobility contracts: A mobility contract is concluded between the City of Graz and the property developers in the course of development plans and serves to reduce the motor vehicle traffic to be expected as a result of the construction project. Push & pull measures are agreed: With a lower car parking space key, which is significantly lower than today's usual requirements, offers and information for easier use of public transport, walking and cycling, as well as car sharing and e-mobility are simultaneously created by the property developers, leading to a win-win-win situation for all parties involved. Basic principles - Possibility of combining effective "push & pull" measures => control option (e.g. reduction of car parking spaces, but optimisation of accessibility to public transport and walking and cycling networks, public transport tickets, mobility information, ... etc.) - Changing mobility behaviour in favour of sustainable forms of transport from the moment the flat is handed over ("upheaval" in personal mobility behaviour when changing the residential location) - Reduction in construction and maintenance costs (underground car parks, public road infrastructure) - Easier realisation of larger construction projects in the inner city area with lower generation of vehicle demand Städtebauliche Verträge in Graz / Urban development contracts in Graz Qualitative urban (neighbourhood) development with added value for all stakeholders: urban development contracts are modern instruments in the development of cities and neighbourhoods. As one of the pioneers in this field, the City of Graz also increasingly favours this form of quality assurance. Urban development contracts are a contractual form of regulation between the City of Graz and landowners, which enables flexible control of urban (sub)development in the interests of the common interests while at the same time relieving the public authorities. The contracts make property-related stipulations in accordance with urban planning requirements (e.g. urban development concept, development concept, framework plan, zoning plan) and the specialist planning requirements in particular infrastructure, development, design and mobility. This is intended to infrastructure, services of general interest, building land quality and settlement development required for the (parts of the) city. | ||||
| B1P001: PED/PED relevant concept definition | ||||||||
| B1P001: PED/PED relevant concept definition | Pilastro-Roveri district can be considered as a PED-relevant area. Even though at the moment the area doesn’t meet annual energy positive balance, it addresses some relevant key aspects listed in the JPI UE PED Framework Definition such as: - high level of aspiration in terms of energy efficiency, energy flexibility and energy production; - integration of different systems and infrastructures; - inclusion of aspects not only related to energy sector, but also connected with social, economic and environmental sustainability. | The demonstration projects is a new residential development, which consists of an apartment complex which includes 39 apartments spread over 3 floors. It is a sustainble plus energy neighbouhood, and has reached a plus energy balance on its first year in operation. It has MPC controls on the individual heat pumps to improve the energy flexibility of the apartments. It includes the "social beatiful" concepts with a strong emphasis on the social sustainability of the project. | Reininghaus addresses some relevant key aspects listed in the JPI UE PED Framework Definition such as: - high level of aspiration in terms of energy efficiency, energy flexibility and energy production; - integration of different systems and infrastructures; - inclusion of aspects not only related to energy sector, but also connected with social, economic and environmental sustainability. | |||||
| B1P002: Motivation behind PED/PED relevant project development | ||||||||
| B1P002: Motivation behind PED/PED relevant project development | Pilastro-Roveri district is not actually meant to become a PEDs. However, it can be considered as a PED-relevant case-study since a participatory transition pathway towards a more sustainable, efficient and resilient district is gaining ground, involving the main urban stakeholders. At the same time, the most recent city plan and policies (such as the city SECAPs - updated in 2021) are promoting PED model as a key strategy to guide Bologna towards climate neutrality by 2030. | The need for social housing and the ambition to create a great living environment with a high-performance apartment complex, supplied with renewable energy. It results in lower energy bills for the tenants and high-quality homes. | The Reininghausgründe is a new quarter near the centre of the City of Graz. On the area of a former brewery, close to more, still working industries, a new town centre is being established. The quarter will include living areas, workplaces, shops, schools and a park, so that the need for individual mobility is minimized. It is connected to the historical city centre by bike paths, busses and a tram. Car sharing is provided as well. | |||||
| B1P003: Environment of the case study area | ||||||||
| B2P003: Environment of the case study area | Urban area | Rural | Suburban area | Urban area | Suburban area | |||
| B1P004: Type of district | ||||||||
| B2P004: Type of district |
|
|
|
| ||||
| B1P005: Case Study Context | ||||||||
| B1P005: Case Study Context |
|
|
|
|
| |||
| B1P006: Year of construction | ||||||||
| B1P006: Year of construction | 2025 | |||||||
| B1P007: District population before intervention - Residential | ||||||||
| B1P007: District population before intervention - Residential | 0 | |||||||
| B1P008: District population after intervention - Residential | ||||||||
| B1P008: District population after intervention - Residential | 10000 | |||||||
| B1P009: District population before intervention - Non-residential | ||||||||
| B1P009: District population before intervention - Non-residential | 0 | |||||||
| B1P010: District population after intervention - Non-residential | ||||||||
| B1P010: District population after intervention - Non-residential | ||||||||
| B1P011: Population density before intervention | ||||||||
| B1P011: Population density before intervention | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| B1P012: Population density after intervention | ||||||||
| B1P012: Population density after intervention | 0 | 0 | 0 | 0 | 0 | 0 | 0.01 | 0 |
| B1P013: Building and Land Use before intervention | ||||||||
| B1P013: Residential | no | no | yes | no | no | no | no | no |
| B1P013 - Residential: Specify the sqm [m²] | ||||||||
| B1P013: Office | no | no | yes | no | no | no | no | no |
| B1P013 - Office: Specify the sqm [m²] | ||||||||
| B1P013: Industry and Utility | no | no | yes | no | no | no | yes | no |
| B1P013 - Industry and Utility: Specify the sqm [m²] | ||||||||
| B1P013: Commercial | no | no | yes | no | no | no | no | no |
| B1P013 - Commercial: Specify the sqm [m²] | ||||||||
| B1P013: Institutional | no | no | yes | no | no | no | no | no |
| B1P013 - Institutional: Specify the sqm [m²] | ||||||||
| B1P013: Natural areas | no | no | yes | no | no | no | yes | no |
| B1P013 - Natural areas: Specify the sqm [m²] | ||||||||
| B1P013: Recreational | no | no | yes | no | no | no | no | no |
| B1P013 - Recreational: Specify the sqm [m²] | ||||||||
| B1P013: Dismissed areas | no | no | yes | no | no | no | no | no |
| B1P013 - Dismissed areas: Specify the sqm [m²] | ||||||||
| B1P013: Other | no | no | no | no | no | no | no | no |
| B1P013 - Other: Specify the sqm [m²] | ||||||||
| B1P014: Building and Land Use after intervention | ||||||||
| B1P014: Residential | no | no | yes | no | no | yes | yes | yes |
| B1P014 - Residential: Specify the sqm [m²] | 2394 | |||||||
| B1P014: Office | no | no | yes | no | no | no | yes | no |
| B1P014 - Office: Specify the sqm [m²] | ||||||||
| B1P014: Industry and Utility | no | no | yes | no | no | no | no | no |
| B1P014 - Industry and Utility: Specify the sqm [m²] | ||||||||
| B1P014: Commercial | no | no | yes | no | no | no | yes | no |
| B1P014 - Commercial: Specify the sqm [m²] | ||||||||
| B1P014: Institutional | no | no | yes | no | no | no | yes | no |
| B1P014 - Institutional: Specify the sqm [m²] | ||||||||
| B1P014: Natural areas | no | no | yes | no | no | no | yes | no |
| B1P014 - Natural areas: Specify the sqm [m²] | ||||||||
| B1P014: Recreational | no | no | yes | no | no | no | yes | no |
| B1P014 - Recreational: Specify the sqm [m²] | ||||||||
| B1P014: Dismissed areas | no | no | yes | no | no | no | no | no |
| B1P014 - Dismissed areas: Specify the sqm [m²] | ||||||||
| B1P014: Other | no | no | no | no | no | no | no | yes |
| B1P014 - Other: Specify the sqm [m²] | ||||||||
| B2P001: PED Lab concept definition | ||||||||
| B2P001: PED Lab concept definition | addressing the concept and implementation of Microgrids and aims to become a leading experimental facility for improving the optimal development of Flexible Energy Buildings and Flexibility Aggregation | |||||||
| B2P002: Installation life time | ||||||||
| B2P002: Installation life time | CEDER will follow an integrative approach including technology for a permanent installation. | |||||||
| B2P003: Scale of action | ||||||||
| B2P003: Scale | Virtual | District | ||||||
| B2P004: Operator of the installation | ||||||||
| B2P004: Operator of the installation | IREC | CIEMAT. Data detail in contact: mariano.martin@ciemat.es and oscar.izquiedo@ciemat.es | ||||||
| B2P005: Replication framework: Applied strategy to reuse and recycling the materials | ||||||||
| B2P005: Replication framework: Applied strategy to reuse and recycling the materials | ||||||||
| B2P006: Circular Economy Approach | ||||||||
| B2P006: Do you apply any strategy to reuse and recycling the materials? | No | No | ||||||
| B2P006: Other | ||||||||
| B2P007: Motivation for developing the PED Lab | ||||||||
| B2P007: Motivation for developing the PED Lab |
|
| ||||||
| B2P007: Other | ||||||||
| B2P008: Lead partner that manages the PED Lab | ||||||||
| B2P008: Lead partner that manages the PED Lab | Research center/University | Research center/University | ||||||
| B2P008: Other | ||||||||
| B2P009: Collaborative partners that participate in the PED Lab | ||||||||
| B2P009: Collaborative partners that participate in the PED Lab |
| |||||||
| B2P009: Other | ||||||||
| B2P010: Synergies between the fields of activities | ||||||||
| B2P010: Synergies between the fields of activities | The operation of the laboratory with all the components of the energy networks requires a collaborative work between various departments and entities. On the one hand, it is necessary to optimize the operation of renewable systems based on the weather conditions, forecast of the demand side and the flexibility of the generation systems. On the other hand, the optimization of the energy demands through a more sustainable behaviour of both the building and the users want to be acquired. For this, it is necessary to take into account technical aspects but also market, comfort and encourage the user participation, creating a decision-making matrix that allows optimizing the operation of the global system. | |||||||
| B2P011: Available facilities to test urban configurations in PED Lab | ||||||||
| B2P011: Available facilities to test urban configurations in PED Lab |
|
| ||||||
| B2P011: Other | ||||||||
| B2P012: Incubation capacities of PED Lab | ||||||||
| B2P012: Incubation capacities of PED Lab |
|
| ||||||
| B2P013: Availability of the facilities for external people | ||||||||
| B2P013: Availability of the facilities for external people | ||||||||
| B2P014: Monitoring measures | ||||||||
| B2P014: Monitoring measures |
|
| ||||||
| B2P015: Key Performance indicators | ||||||||
| B2P015: Key Performance indicators |
|
| ||||||
| B2P016: Execution of operations | ||||||||
| B2P016: Execution of operations | ||||||||
| B2P017: Capacities | ||||||||
| B2P017: Capacities | - Building simulation model: thermal inertia and thermal loads of a building or community can be co-simulated with a building model. – System Operator and Aggregator simulation models: the interaction with remote control actions carried out by electricity System Operators or flexibility Aggregators can be simulated as well. – Grid simulation model: the physical interaction of the building with the grid power supply can be simulated enabling the experimental validation of flexibility services to the network. | - Innovative grid configuration to connect bio boilers and solar thermal on buildings. - Environmental & air quality evaluation. - Testing and evaluation of high efficient heating & cooling systems: Gas, biomass, geothermal and absorption H&C pumps … - Definition and implementation of the different regulation modes for the global system. Using the data from the research focused-partners, several regulation modes for the DH network could be defined and implemented in order to obtain an optimal operation of the network. - Innovation in MPC control to enable harvesting 100% renewables in the most efficient way. - Physical integration of the technologies with the existing facilities at the living lab. - Connection between the solar thermal collectors to achieve the lowest heat losses, providing the possibility to use the grid as high or low temperature DH, according to the demand schedule of the buildings. - Test the bio-boiler of the last generation and ultra-low emissions biomass condensing boiler in order to increase efficiency and reduce GHG and air pollutant emissions of the DH plant. - Control of the supply temperature of the DH grid to enable 100% renewables harvesting in the most efficient way. - Research of the incidence of a normal building or a bioclimatic building in the DH grid demand. - Methodologies for concept validation: Definition of the minimum requirements to verify the suitability of the solutions proposed. - Tests campaign: Experimental operation and characterization in a relevant environment, to exploit the technologies at their best and test different demand profiles, different configuration and loads, with real time monitoring and continuous commissioning to control the performance of the technology. - Validation and upgrading recommendation for the DH&C at district level. - Evaluation of innovation actions for potential energy interventions with demand response in buildings. - The complete available infrastructure (MV and LV electric systems, transformation hubs, end consumption, generation sources, communication elements, etc.) belongs to CEDER-CIEMAT, making this the perfect scenario to test and try the performance of “Smart Grid” and “Microgrid” projects. - The type of electric grid, its voltage levels (MV or LV), its variety of real loads (different buildings with different profiles: industrial buildings, offices and so on) and its sources of renewable generation and storage, mean it is ideal for intermediate tests between a small-scale laboratory and final deployment of the real product. | ||||||
| B2P018: Relations with stakeholders | ||||||||
| B2P018: Relations with stakeholders | CEDER - CIEMAT is a public research body assigned to the Ministry of Science and Innovation under the General Secretariat for Research, focusing on energy and environment. To develop this lab CIEMAT has relations with private renewable companies, research centers and academia institutions. | |||||||
| B2P019: Available tools | ||||||||
| B2P019: Available tools |
|
| ||||||
| B2P019: Available tools | ||||||||
| B2P020: External accessibility | ||||||||
| B2P020: External accessibility | CIEMAT is a public body, so it´s open to any institution according the actual regulation and agreements. | |||||||
| C1P001: Unlocking Factors | ||||||||
| C1P001: Recent technological improvements for on-site RES production | 5 - Very important | 1 - Unimportant | 4 - Important | 2 - Slightly important | 3 - Moderately important | 3 - Moderately important | 1 - Unimportant | |
| C1P001: Innovative, integrated, prefabricated packages for buildings envelope / Energy efficiency of building stock | 5 - Very important | 1 - Unimportant | 4 - Important | 5 - Very important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P001: Energy Communities, P2P, Prosumers concepts | 5 - Very important | 3 - Moderately important | 5 - Very important | 5 - Very important | 3 - Moderately important | 4 - Important | 1 - Unimportant | |
| C1P001: Storage systems and E-mobility market penetration | 5 - Very important | 3 - Moderately important | 2 - Slightly important | 4 - Important | 2 - Slightly important | 1 - Unimportant | ||
| C1P001: Decreasing costs of innovative materials | 4 - Important | 3 - Moderately important | 3 - Moderately important | 1 - Unimportant | 4 - Important | 2 - Slightly important | 1 - Unimportant | |
| C1P001: Financial mechanisms to reduce costs and maximize benefits | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant | 3 - Moderately important | 2 - Slightly important | 1 - Unimportant | |
| C1P001: The ability to predict Multiple Benefits | 4 - Important | 4 - Important | 3 - Moderately important | 3 - Moderately important | 4 - Important | 1 - Unimportant | ||
| C1P001: The ability to predict the distribution of benefits and impacts | 4 - Important | 1 - Unimportant | 4 - Important | 3 - Moderately important | 4 - Important | 1 - Unimportant | ||
| C1P001: Citizens improved awareness and engagement on sustainable energy issues (bottom-up) | 5 - Very important | 1 - Unimportant | 5 - Very important | 4 - Important | 3 - Moderately important | 5 - Very important | 1 - Unimportant | |
| C1P001: Social acceptance (top-down) | 5 - Very important | 1 - Unimportant | 3 - Moderately important | 3 - Moderately important | 5 - Very important | 4 - Important | 1 - Unimportant | |
| C1P001: Improved local and national policy frameworks (i.e. incentives, laws etc.) | 3 - Moderately important | 1 - Unimportant | 4 - Important | 3 - Moderately important | 4 - Important | 5 - Very important | 1 - Unimportant | |
| C1P001: Presence of integrated urban strategies and plans | 3 - Moderately important | 1 - Unimportant | 5 - Very important | 3 - Moderately important | 3 - Moderately important | 5 - Very important | 1 - Unimportant | |
| C1P001: Multidisciplinary approaches available for systemic integration | 3 - Moderately important | 4 - Important | 4 - Important | 2 - Slightly important | 5 - Very important | 5 - Very important | 1 - Unimportant | |
| C1P001: Availability of grants (from EC or other donors) to finance the PED Lab projects | 4 - Important | 5 - Very important | 4 - Important | 5 - Very important | 1 - Unimportant | 4 - Important | 1 - Unimportant | |
| C1P001: Availability of RES on site (Local RES) | 4 - Important | 4 - Important | 5 - Very important | 5 - Very important | 3 - Moderately important | 1 - Unimportant | ||
| C1P001: Ongoing or established collaboration on Public Private Partnership among key stakeholders | 4 - Important | 5 - Very important | 3 - Moderately important | 3 - Moderately important | 4 - Important | 5 - Very important | 1 - Unimportant | |
| C1P001: Any other UNLOCKING FACTORS | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | ||
| C1P001: Any other UNLOCKING FACTORS (if any) | ||||||||
| C1P002: Driving Factors | ||||||||
| C1P002: Climate Change adaptation need | 4 - Important | 4 - Important | 4 - Important | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant | |
| C1P002: Climate Change mitigation need (local RES production and efficiency) | 5 - Very important | 4 - Important | 5 - Very important | 5 - Very important | 5 - Very important | 5 - Very important | 1 - Unimportant | |
| C1P002: Rapid urbanization trend and need of urban expansions | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 4 - Important | 1 - Unimportant | |
| C1P002: Urban re-development of existing built environment | 3 - Moderately important | 4 - Important | 5 - Very important | 5 - Very important | 4 - Important | 5 - Very important | 1 - Unimportant | |
| C1P002: Economic growth need | 2 - Slightly important | 4 - Important | 3 - Moderately important | 3 - Moderately important | 1 - Unimportant | 3 - Moderately important | 1 - Unimportant | |
| C1P002: Improved local environmental quality (air, noise, aesthetics, etc.) | 3 - Moderately important | 4 - Important | 4 - Important | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant | |
| C1P002: Territorial and market attractiveness | 2 - Slightly important | 1 - Unimportant | 3 - Moderately important | 3 - Moderately important | 2 - Slightly important | 5 - Very important | 1 - Unimportant | |
| C1P002: Energy autonomy/independence | 5 - Very important | 5 - Very important | 4 - Important | 4 - Important | 1 - Unimportant | 3 - Moderately important | 1 - Unimportant | |
| C1P002: Any other DRIVING FACTOR | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | ||
| C1P002: Any other DRIVING FACTOR (if any) | ||||||||
| C1P003: Administrative barriers | ||||||||
| C1P003: Difficulty in the coordination of high number of partners and authorities | 4 - Important | 4 - Important | 4 - Important | 4 - Important | 1 - Unimportant | 5 - Very important | 1 - Unimportant | |
| C1P003: Lack of good cooperation and acceptance among partners | 3 - Moderately important | 1 - Unimportant | 2 - Slightly important | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P003: Lack of public participation | 3 - Moderately important | 2 - Slightly important | 2 - Slightly important | 1 - Unimportant | 1 - Unimportant | 4 - Important | 1 - Unimportant | |
| C1P003: Lack of institutions/mechanisms to disseminate information | 3 - Moderately important | 3 - Moderately important | 3 - Moderately important | 3 - Moderately important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P003:Long and complex procedures for authorization of project activities | 5 - Very important | 5 - Very important | 5 - Very important | 5 - Very important | 1 - Unimportant | 5 - Very important | 1 - Unimportant | |
| C1P003: Time consuming requirements by EC or other donors concerning reporting and accountancy | 4 - Important | 5 - Very important | 4 - Important | 4 - Important | 1 - Unimportant | 3 - Moderately important | 1 - Unimportant | |
| C1P003: Complicated and non-comprehensive public procurement | 4 - Important | 3 - Moderately important | 4 - Important | 4 - Important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P003: Fragmented and or complex ownership structure | 3 - Moderately important | 5 - Very important | 5 - Very important | 5 - Very important | 1 - Unimportant | 5 - Very important | 1 - Unimportant | |
| C1P003: City administration & cross-sectoral attitude/approaches (silos) | 3 - Moderately important | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant | 4 - Important | 1 - Unimportant | |
| C1P003: Lack of internal capacities to support energy transition | 3 - Moderately important | 4 - Important | 4 - Important | 4 - Important | 1 - Unimportant | 3 - Moderately important | 1 - Unimportant | |
| C1P003: Any other Administrative BARRIER | 5 - Very important | 1 - Unimportant | 1 - Unimportant | 4 - Important | 1 - Unimportant | 1 - Unimportant | ||
| C1P003: Any other Administrative BARRIER (if any) | Delay in the Environmental Dialogue processing in the municipality | |||||||
| C1P004: Policy barriers | ||||||||
| C1P004: Lack of long-term and consistent energy plans and policies | 4 - Important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P004: Lacking or fragmented local political commitment and support on the long term | 4 - Important | 1 - Unimportant | 2 - Slightly important | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P004: Lack of Cooperation & support between national-regional-local entities | 3 - Moderately important | 2 - Slightly important | 3 - Moderately important | 3 - Moderately important | 1 - Unimportant | 3 - Moderately important | 1 - Unimportant | |
| C1P004: Any other Political BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | ||
| C1P004: Any other Political BARRIER (if any) | ||||||||
| C1P005: Legal and Regulatory barriers | ||||||||
| C1P005: Inadequate regulations for new technologies | 4 - Important | 5 - Very important | 4 - Important | 4 - Important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | |
| C1P005: Regulatory instability | 3 - Moderately important | 2 - Slightly important | 3 - Moderately important | 3 - Moderately important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | |
| C1P005: Non-effective regulations | 4 - Important | 2 - Slightly important | 4 - Important | 4 - Important | 1 - Unimportant | 3 - Moderately important | 1 - Unimportant | |
| C1P005: Unfavorable local regulations for innovative technologies | 3 - Moderately important | 4 - Important | 2 - Slightly important | 2 - Slightly important | 1 - Unimportant | 4 - Important | 1 - Unimportant | |
| C1P005: Building code and land-use planning hindering innovative technologies | 4 - Important | 3 - Moderately important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P005: Insufficient or insecure financial incentives | 4 - Important | 5 - Very important | 4 - Important | 3 - Moderately important | 1 - Unimportant | 4 - Important | 1 - Unimportant | |
| C1P005: Unresolved privacy concerns and limiting nature of privacy protection regulation | 4 - Important | 1 - Unimportant | 4 - Important | 4 - Important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P005: Shortage of proven and tested solutions and examples | 4 - Important | 2 - Slightly important | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | ||
| C1P005: Any other Legal and Regulatory BARRIER | 4 - Important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | ||
| C1P005: Any other Legal and Regulatory BARRIER (if any) | ||||||||
| C1P006: Environmental barriers | ||||||||
| C1P006: Environmental barriers | 3 - Moderately important | |||||||
| C1P007: Technical barriers | ||||||||
| C1P007: Lack of skilled and trained personnel | 4 - Important | 5 - Very important | 4 - Important | 1 - Unimportant | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P007: Deficient planning | 3 - Moderately important | 5 - Very important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P007: Retrofitting work in dwellings in occupied state | 4 - Important | 1 - Unimportant | 5 - Very important | 2 - Slightly important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | |
| C1P007: Lack of well-defined process | 4 - Important | 4 - Important | 5 - Very important | 2 - Slightly important | 1 - Unimportant | 4 - Important | 1 - Unimportant | |
| C1P007: Inaccuracy in energy modelling and simulation | 4 - Important | 5 - Very important | 4 - Important | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P007: Lack/cost of computational scalability | 4 - Important | 4 - Important | 4 - Important | 5 - Very important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P007: Grid congestion, grid instability | 4 - Important | 5 - Very important | 4 - Important | 5 - Very important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | |
| C1P007: Negative effects of project intervention on the natural environment | 3 - Moderately important | 1 - Unimportant | 2 - Slightly important | 5 - Very important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P007: Energy retrofitting work in dense and/or historical urban environment | 5 - Very important | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | |
| C1P007: Difficult definition of system boundaries | 3 - Moderately important | 1 - Unimportant | 5 - Very important | 2 - Slightly important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | |
| C1P007: Any other Thecnical BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | ||
| C1P007: Any other Thecnical BARRIER (if any) | ||||||||
| C1P008: Social and Cultural barriers | ||||||||
| C1P008: Inertia | 4 - Important | 4 - Important | 2 - Slightly important | 2 - Slightly important | 1 - Unimportant | 3 - Moderately important | 1 - Unimportant | |
| C1P008: Lack of values and interest in energy optimization measurements | 5 - Very important | 5 - Very important | 3 - Moderately important | 2 - Slightly important | 1 - Unimportant | 4 - Important | 1 - Unimportant | |
| C1P008: Low acceptance of new projects and technologies | 5 - Very important | 5 - Very important | 3 - Moderately important | 2 - Slightly important | 1 - Unimportant | 3 - Moderately important | 1 - Unimportant | |
| C1P008: Difficulty of finding and engaging relevant actors | 5 - Very important | 5 - Very important | 4 - Important | 3 - Moderately important | 1 - Unimportant | 4 - Important | 1 - Unimportant | |
| C1P008: Lack of trust beyond social network | 4 - Important | 3 - Moderately important | 5 - Very important | 4 - Important | 1 - Unimportant | 3 - Moderately important | 1 - Unimportant | |
| C1P008: Rebound effect | 4 - Important | 4 - Important | 4 - Important | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |
| C1P008: Hostile or passive attitude towards environmentalism | 5 - Very important | 5 - Very important | 2 - Slightly important | 5 - Very important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | |
| C1P008: Exclusion of socially disadvantaged groups | 2 - Slightly important | 1 - Unimportant | 3 - Moderately important | 2 - Slightly important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | |
| C1P008: Non-energy issues are more important and urgent for actors | 3 - Moderately important | 1 - Unimportant | 4 - Important | 3 - Moderately important | 1 - Unimportant | 4 - Important | 1 - Unimportant | |
| C1P008: Hostile or passive attitude towards energy collaboration | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | ||
| C1P008: Any other Social BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | ||
| C1P008: Any other Social BARRIER (if any) | ||||||||
| C1P009: Information and Awareness barriers | ||||||||
| C1P009: Insufficient information on the part of potential users and consumers | 1 - Unimportant | 4 - Important | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | ||
| C1P009: Perception of interventions as complicated and expensive, with negative socio-economic or environmental impacts | 5 - Very important | 4 - Important | 5 - Very important | 1 - Unimportant | 4 - Important | 1 - Unimportant | ||
| C1P009: Lack of awareness among authorities | 2 - Slightly important | 3 - Moderately important | 4 - Important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | ||
| C1P009: Information asymmetry causing power asymmetry of established actors | 1 - Unimportant | 3 - Moderately important | 2 - Slightly important | 1 - Unimportant | 4 - Important | 1 - Unimportant | ||
| C1P009: High costs of design, material, construction, and installation | 5 - Very important | 4 - Important | 4 - Important | 1 - Unimportant | 4 - Important | 1 - Unimportant | ||
| C1P009: Any other Information and Awareness BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | ||
| C1P009: Any other Information and Awareness BARRIER (if any) | ||||||||
| C1P010: Financial barriers | ||||||||
| C1P010: Hidden costs | 5 - Very important | 4 - Important | 2 - Slightly important | 1 - Unimportant | 3 - Moderately important | 1 - Unimportant | ||
| C1P010: Insufficient external financial support and funding for project activities | 5 - Very important | 4 - Important | 5 - Very important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | ||
| C1P010: Economic crisis | 4 - Important | 4 - Important | 3 - Moderately important | 1 - Unimportant | 4 - Important | 1 - Unimportant | ||
| C1P010: Risk and uncertainty | 5 - Very important | 5 - Very important | 2 - Slightly important | 5 - Very important | 2 - Slightly important | 1 - Unimportant | ||
| C1P010: Lack of consolidated and tested business models | 5 - Very important | 5 - Very important | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | ||
| C1P010: Limited access to capital and cost disincentives | 3 - Moderately important | 5 - Very important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | |||
| C1P010: Any other Financial BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | ||
| C1P010: Any other Financial BARRIER (if any) | ||||||||
| C1P011: Market barriers | ||||||||
| C1P011: Split incentives | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant | 2 - Slightly important | 1 - Unimportant | ||
| C1P011: Energy price distortion | 5 - Very important | 5 - Very important | 5 - Very important | 1 - Unimportant | 4 - Important | 1 - Unimportant | ||
| C1P011: Energy market concentration, gatekeeper actors (DSOs) | 5 - Very important | 4 - Important | 2 - Slightly important | 1 - Unimportant | 4 - Important | 1 - Unimportant | ||
| C1P011: Any other Market BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | ||
| C1P011: Any other Market BARRIER (if any) | ||||||||
| C1P012: Stakeholders involved | ||||||||
| C1P012: Government/Public Authorities |
|
|
|
| ||||
| C1P012: Research & Innovation |
|
|
|
| ||||
| C1P012: Financial/Funding |
|
|
| |||||
| C1P012: Analyst, ICT and Big Data |
|
|
| |||||
| C1P012: Business process management |
|
|
| |||||
| C1P012: Urban Services providers |
|
|
| |||||
| C1P012: Real Estate developers |
|
|
|
| ||||
| C1P012: Design/Construction companies |
|
|
|
| ||||
| C1P012: End‐users/Occupants/Energy Citizens |
|
|
|
| ||||
| C1P012: Social/Civil Society/NGOs |
|
|
| |||||
| C1P012: Industry/SME/eCommerce |
|
|
| |||||
| C1P012: Other |
| |||||||
| C1P012: Other (if any) | ||||||||
| Summary |
Authors (framework concept)
Beril Alpagut (Demir Energy); Giulia Turci (University of Bologna); Michal Kuzmic (Czech Technical University in Prague); Paolo Civiero (Università Roma Tre); Serena Pagliulia (University of Bologna); Oscar Seco (CIEMAT); Silvia Soutullo (CIEMAT); Daniele Vettorato (EURAC Research, IEA Annex 83); Bailador Ferreras M. Almudena (CIEMAT); Vicky Albert-Seifried (FHG ISE)
Contributors (to the content)
Laura Aelenei (LNEG), Nienke Maas (TNO), Savis Gohari (OsloMet), Andras Reith (ABUD), Ghazal Etminan (AIT), Maria-Beatrice Andreucci (Universita Sapienza), Francesco Reda (VTT, IEA Annex 83), Mari Hukkalainen (VTT), Judith-Borsboom (Locality), Gilda Massa (ENEA), Jelena Ziemele (University of Latvia), Nikola Pokorny (CVUT), Sergio Diaz de Garayo Balsategui (CENER, IEA Annex 83), Matthias Haaze (ZHAW, IEA Annex 83), Christoph Gollner (FFG, JPI UE), Silvia Bossi (ENEA, JPI UE), Christian Winzer (Zurich University of Applied Science), George Martinopoulos (Centre for Research and Technology Hellas), Maria Nuria Sánchez (CIEMAT), Angelina Tomova (Energy Agency of Plovdiv)
Implemented by
Boutik.pt: Filipe Martins, Jamal Khan
Marek Suchánek (Czech Technical University in Prague)
