| Name | Project | Type | Compare |
|---|---|---|---|
| Romania, Alba Iulia PED | ASCEND – Accelerate poSitive Clean ENergy Districts | PED Case Study | Compare |
| Romania, Alba Iulia PED | InterPED – INTERoperable cloud-based solution for cross-vector planning and management of Positive Energy Districts | PED Case Study | Compare |
| Munich, Harthof district | PED Case Study | Compare | |
| Lublin | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Uncompare |
| Roubaix, MustBe0 – Résidence Philippe le Hardi – 125 Rue d’Oran | CULTURAL-E – Climate and cultural-based solutions for Plus Energy Buildings | PED Relevant Case Study | Compare |
| Bærum, Eiksveien 116 | CULTURAL-E – Climate and cultural-based solutions for Plus Energy Buildings | PED Relevant Case Study | Compare |
| Findhorn, the Park | InterPED – INTERoperable cloud-based solution for cross-vector planning and management of Positive Energy Districts | PED Case Study | Compare |
| Amsterdam, Buiksloterham PED | ATELIER – AmsTErdam BiLbao cItizen drivEn smaRt cities | PED Case Study | Uncompare |
| Schönbühel-Aggsbach, Schönbühel an der Donau | PED-ACT – Auto characterization of PEDs for digital references towards iterative process optimisation | PED Relevant Case Study | Compare |
| Umeå, Ålidhem district | PED-ACT – Auto characterization of PEDs for digital references towards iterative process optimisation | PED Case Study | Compare |
| Aalborg East | PED Relevant Case Study / PED Lab | Compare | |
| Ankara, Çamlık District | PED-ACT – Auto characterization of PEDs for digital references towards iterative process optimisation | PED Case Study / PED Relevant Case Study | Compare |
| Trenčín | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Luxembourg, Betzdorf | LEGOFIT – Adaptable technological solutions based on early design actions for the construction and renovation of Energy Positive Homes | PED Relevant Case Study | Compare |
| Vantaa, Aviapolis | NEUTRALPATH – Pathway towards Climate-Neutrality through low risky and fully replicable Positive Clean Energy Districts | PED Case Study / PED Relevant Case Study / PED Lab | Compare |
| Vidin, Himik and Bononia | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Oslo, Verksbyen | Syn.ikia – Sustainable Plus Energy Neighbourhoods | PED Case Study | Compare |
| Uden, Loopkantstraat | Syn.ikia – Sustainable Plus Energy Neighbourhoods | PED Relevant Case Study | Compare |
| Zaragoza, Actur | NEUTRALPATH – Pathway towards Climate-Neutrality through low risky and fully replicable Positive Clean Energy Districts | PED Relevant Case Study | Compare |
| Aarhus, Brabrand | BIPED – Building Intelligent Positive Energy Districts | PED Case Study / PED Relevant Case Study / PED Lab | Compare |
| Riga, Ķīpsala, RTU smart student city | ExPEDite – Enabling Positive Energy Districts through Digital Twins | PED Case Study | Compare |
| Izmir, District of Karşıyaka | PED-ACT – Auto characterization of PEDs for digital references towards iterative process optimisation | PED Case Study | Uncompare |
| Istanbul, Ozyegin University Campus | LEGOFIT – Adaptable technological solutions based on early design actions for the construction and renovation of Energy Positive Homes | PED Relevant Case Study | Compare |
| Espoo, Kera | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Case Study / PED Relevant Case Study | Compare |
| Borlänge, Rymdgatan’s Residential Portfolio | PED-ACT – Auto characterization of PEDs for digital references towards iterative process optimisation | PED Relevant Case Study | Compare |
| Freiburg, Waldsee | PED urban – Development of methods and tools for accounting, planning and operation of climate-neutral district | PED Case Study | Compare |
| Innsbruck, Campagne-Areal | PED Relevant Case Study | Compare | |
| Graz, Reininghausgründe | PED Case Study | Compare | |
| Stor-Elvdal, Campus Evenstad | ZEN – Research Centre on Zero Emission Neighbourhoods in Smart Cities | PED Relevant Case Study | Compare |
| Oulu, Kaukovainio | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Halmstad, Fyllinge | PED Relevant Case Study | Compare | |
| Lund, Brunnshög district | PED Case Study | Compare | |
| Vienna, Am Kempelenpark | PED Case Study | Compare | |
| Évora, Portugal | POCITYF – A POsitive Energy CITY Transformation Framework | PED Relevant Case Study / PED Lab | Compare |
| Kladno, Sletiště (Sport Area), PED Winter Stadium | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Relevant Case Study | Compare |
| Groningen, PED South | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Lab | Compare |
| Groningen, PED North | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Lab | Compare |
| Maia, Sobreiro Social Housing | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Lab | Compare |
| Lubia (Soria), CEDER-CIEMAT | PED Lab | Compare | |
| Tampere, Ilokkaanpuisto district | STARDUST – Holistic and Integrated Urban Model for Smart Cities | PED Relevant Case Study | Compare |
| Leon, Former Sugar Factory district | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Istanbul, Kadikoy district, Caferaga | MAKING-CITY – Energy efficient pathway for the city transformation: enabling a positive future | PED Case Study | Compare |
| Espoo, Leppävaara district, Sello center | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Case Study | Compare |
| Espoo, Espoonlahti district, Lippulaiva block | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Case Study | Compare |
| Salzburg, Gneis district | Syn.ikia – Sustainable Plus Energy Neighbourhoods | PED Case Study | Compare |
| Barcelona, Santa Coloma de Gramenet | Syn.ikia – Sustainable Plus Energy Neighbourhoods | PED Case Study | Compare |
| Tartu, City centre area | SmartEnCity – Towards Smart Zero CO2 Cities across Europe | PED Relevant Case Study / PED Lab | |
| Bologna, Pilastro-Roveri district | GRETA – GReen Energy Transition Actions | PED Relevant Case Study | Uncompare |
| Barcelona, SEILAB & Energy SmartLab | PED Lab | Uncompare | |
| Leipzig, Baumwollspinnerei district | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Case Study | Compare |
| Kifissia, Energy community | SPARCS – Sustainable energy Positive & zero cARbon CommunitieS | PED Relevant Case Study | Compare |
| Title | Tartu, City centre area | Barcelona, SEILAB & Energy SmartLab | Bologna, Pilastro-Roveri district | Lublin | Izmir, District of Karşıyaka | Amsterdam, Buiksloterham PED |
|---|---|---|---|---|---|---|
| A1P001: Name of the PED case study / PED Lab | ||||||
| A1P001: Name of the PED case study / PED Lab | Tartu, City centre area | Barcelona, SEILAB & Energy SmartLab | Bologna, Pilastro-Roveri district | Lublin | Izmir, District of Karşıyaka | Amsterdam, Buiksloterham PED |
| A1P002: Map / aerial view / photos / graphic details / leaflet | ||||||
| A1P002: Map / aerial view / photos / graphic details / leaflet |
|
| ||||
| A1P003: Categorisation of the PED site | ||||||
| PED case study | no | no | no | yes | yes | yes |
| PED relevant case study | yes | no | yes | no | no | no |
| PED Lab. | yes | yes | no | no | no | no |
| A1P004: Targets of the PED case study / PED Lab | ||||||
| Climate neutrality | yes | no | yes | yes | yes | yes |
| Annual energy surplus | no | no | no | yes | yes | yes |
| Energy community | no | yes | yes | yes | no | yes |
| Circularity | yes | no | no | yes | no | yes |
| Air quality and urban comfort | no | no | no | yes | yes | no |
| Electrification | yes | yes | no | no | no | yes |
| Net-zero energy cost | no | no | no | yes | yes | no |
| Net-zero emission | yes | yes | no | yes | no | yes |
| Self-sufficiency (energy autonomous) | no | yes | no | yes | no | no |
| Maximise self-sufficiency | yes | no | no | yes | yes | no |
| Other | no | yes | no | no | no | no |
| Other (A1P004) | Green IT | |||||
| A1P005: Phase of the PED case study / PED Lab | ||||||
| A1P005: Project Phase of your case study/PED Lab | Implementation Phase | In operation | Planning Phase | Planning Phase | Planning Phase | Implementation Phase |
| A1P006: Start Date | ||||||
| A1P006: Start date | 02/16 | 01/2011 | 09/19 | 10/22 | 11/19 | |
| A1P007: End Date | ||||||
| A1P007: End date | 07/22 | 02/2013 | 10/23 | 10/25 | 10/25 | |
| A1P008: Reference Project | ||||||
| A1P008: Reference Project | ||||||
| A1P009: Data availability | ||||||
| A1P009: Data availability |
|
|
|
|
|
|
| A1P009: Other | Other | https://smartcity-atelier.eu/about/lighthouse-cities/amsterdam/ | ||||
| A1P010: Sources | ||||||
| Any publication, link to website, deliverable referring to the PED/PED Lab |
| |||||
| A1P011: Geographic coordinates | ||||||
| X Coordinate (longitude): | 26.722737 | 2.1 | 11.397323 | 22.5684 | 27.110049 | 4.9041 |
| Y Coordinate (latitude): | 58.380713 | 41.3 | 44.507106 | 51.2465 | 38.496054 | 52.3676 |
| A1P012: Country | ||||||
| A1P012: Country | Estonia | Spain | Italy | Poland | Turkey | Netherlands |
| A1P013: City | ||||||
| A1P013: City | Tartu | Barcelona and Tarragona | Bologna | Lublin | İzmir | Amsterdam |
| A1P014: Climate Zone (Köppen Geiger classification) | ||||||
| A1P014: Climate Zone (Köppen Geiger classification). | Dfb | Csa | Cfa | Cfb | Csa | Cfb |
| A1P015: District boundary | ||||||
| A1P015: District boundary | Functional | Virtual | Geographic | Geographic | Geographic | Functional |
| Other | ||||||
| A1P016: Ownership of the case study/PED Lab | ||||||
| A1P016: Ownership of the case study/PED Lab: | Private | Public | Mixed | Private | Private | Mixed |
| A1P017: Ownership of the land / physical infrastructure | ||||||
| A1P017: Ownership of the land / physical infrastructure: | Multiple Owners | Single Owner | Multiple Owners | Multiple Owners | Multiple Owners | Multiple Owners |
| A1P018: Number of buildings in PED | ||||||
| A1P018: Number of buildings in PED | 18 | 0 | 1962 | 5 | 21 | 60 |
| A1P019: Conditioned space | ||||||
| A1P019: Conditioned space [m²] | 35217 | 21664.73 | 102795 | 28500 | ||
| A1P020: Total ground area | ||||||
| A1P020: Total ground area [m²] | 793144 | 7800000 | 72833.47 | 32600 | ||
| A1P021: Floor area ratio: Conditioned space / total ground area | ||||||
| A1P021: Floor area ratio: Conditioned space / total ground area | 0 | 0 | 0 | 0 | 3 | 0 |
| A1P022: Financial schemes | ||||||
| A1P022a: Financing - PRIVATE - Real estate | yes | no | no | no | no | yes |
| A1P022a: Add the value in EUR if available [EUR] | 6500000 | |||||
| A1P022b: Financing - PRIVATE - ESCO scheme | no | no | no | no | no | no |
| A1P022b: Add the value in EUR if available [EUR] | ||||||
| A1P022c: Financing - PRIVATE - Other | no | no | no | no | no | no |
| A1P022c: Add the value in EUR if available [EUR] | ||||||
| A1P022d: Financing - PUBLIC - EU structural funding | yes | no | no | no | no | no |
| A1P022d: Add the value in EUR if available [EUR] | 4000000 | |||||
| A1P022e: Financing - PUBLIC - National funding | yes | no | yes | no | no | no |
| A1P022e: Add the value in EUR if available [EUR] | 8000000 | |||||
| A1P022f: Financing - PUBLIC - Regional funding | no | no | yes | no | no | no |
| A1P022f: Add the value in EUR if available [EUR] | ||||||
| A1P022g: Financing - PUBLIC - Municipal funding | no | no | yes | no | no | no |
| A1P022g: Add the value in EUR if available [EUR] | ||||||
| A1P022h: Financing - PUBLIC - Other | no | no | no | no | no | no |
| A1P022h: Add the value in EUR if available [EUR] | ||||||
| A1P022i: Financing - RESEARCH FUNDING - EU | no | no | yes | no | yes | yes |
| A1P022i: Add the value in EUR if available [EUR] | 1193355 | |||||
| A1P022j: Financing - RESEARCH FUNDING - National | no | no | no | no | yes | no |
| A1P022j: Add the value in EUR if available [EUR] | ||||||
| A1P022k: Financing - RESEARCH FUNDING - Local/regional | no | no | yes | no | no | no |
| A1P022k: Add the value in EUR if available [EUR] | ||||||
| A1P022l: Financing - RESEARCH FUNDING - Other | no | no | no | no | no | no |
| A1P022l: Add the value in EUR if available [EUR] | ||||||
| A1P022: Other | ||||||
| A1P023: Economic Targets | ||||||
| A1P023: Economic Targets |
|
|
|
|
|
|
| A1P023: Other | ||||||
| A1P024: More comments: | ||||||
| A1P024: More comments: | Semi-Virtual Energy Integration Laboratory (SEILAB) The Energy Smart Lab is an infrastructure conceived as a flexible and versatile platform for innovative technological developments for both industry and competitive R+D projects. The areas of expertise of this laboratory pivot around the following technologies: – Power Electronics for the integration and control of the elements within a building or community: Renewable Energy Sources (RES), Energy Storage Systems and Electric Vehicles (EV) – ICT Platform for smart communications and energy management of systems, building, networks and communities. – Energy System Integration technologies for smart and flexible buildings and grids including RES and EV. The laboratory operation is based on the hardware emulation approach, which allows for real physical equipment to be operated under a broad range of scenarios without depending on the real occurrence of the boundary conditions suitable for the experimental validation. The laboratory is pioneer in addressing the concept and implementation of Microgrids and aims to become a leading experimental facility for improving the optimal development of Flexible Energy Buildings and Flexibility Aggregation. | The Pilastro-Roveri area is a large peri-urban district in the northeast of the city of Bologna (about 650 hectares). In particular, the northern area is mainly characterised by the residential sector of Rione Pilastro, a significant complex of social housing built in the 1960s in response to the housing emergency due to migrations from southern Italy and nowadays satisfying more global migrations. The southern area is instead characterised by the presence of the production district called Roveri. The area appears relevant for the research as it has several evolution potentials towards a climate-neutral district. In particular some key factors are interesting: - the presence of one of the largest photovoltaic parks in Europe on the roofs of CAAB, characterised by a production of 11,350,000 Kw/h of primary energy; - the presence of companies attentive to the issues of climate change and energy, able to act as facilitators for the area. This is the case of FIVE, a leader in the production of electric bicycles, whose plant is the first nZEB (nearly Zero Energy Building) productive building in the city; - the high presence of industrial buildings of different sizes needing a reduction in energy consumption; - the presence of obsolete, sometimes in decay, and of general highly energy-intensive buildings in the Pilastro area, accompanied by spread phenomena of energy poverty; - the presence of spaces that could be converted (e.g. unused warehouses, unexploited green areas, etc.); - the presence of an active community, characterised by numerous associations, but also by social challenges linked to multiple vulnerabilities; - the presence of local actors interested in the development of the area (including the Municipality, the University, Confindustria, ENEA, Confartigianato, etc.). Two main research projects are actually ongoing in the area, applying solutions towards energy improvement and transition strategies to guide the area towards climate neutrality: - GECO - Green Energy Community, funded by EIT Climate-KIC and active since 2019, aims to trigger a virtuous path of energy sharing between companies and citizens through the creation of an energy community. - GRETA - Green Energy Transition Actions, funded by the H2020 programme, aims to understand drivers and barriers on the involvement of citizens in the energy transition processes, by formulating Community Transition Pathways and Energy Citizenship Contracts. [from: Boeri, A., Boulanger, S., Turci, G., Pagliula, S. (2021) Strategie e tecnologie abilitanti per PED misti: efficienza tra smart cities e industria 4.0. TECHNE, 22, 180-190] | Lublin PED Area is geographically bounded and the ambition is to reach Self-Sufficiency. There is a shopping centre with a large rooftop area for solar generation and there are also an empty lot (just on the east side of the building) and a carpark area (on the north side) next to the commercial centre. These areas can also be evaluated for on-site (on the ground – or canopies for cars) energy generation. There are also new built (mainly in 2012) residential blocks with high efficiency and this district is so-called an “eco-district”. Thanks to the District Heating Grid (DHN), all buildings are connected to each other the network has potential for sharing mechanisms in the PED Area. Another opportunity for renewable energy is that these buildings are connected to more or less the end point of DHN and for this reason, a waste heat potential from the return pipe may also be considered. There are also small size residentials, that are not connected to the DHN, around the PED area and this enlightened the technical team for exporting energy from PED to these areas with a new infrastructure. | |||
| A1P025: Estimated PED case study / PED LAB costs | ||||||
| A1P025: Estimated PED case study / PED LAB costs [mil. EUR] | 25 | |||||
| Contact person for general enquiries | ||||||
| A1P026: Name | Jaanus Tamm | Dr. Jaume Salom, Dra. Cristina Corchero | Prof. Danila Longo | Dorota Wolińska-Pietrzak | Ozlem Senyol | Omar Shafqat |
| A1P027: Organization | Tartu City Government | IREC | University of Bologna - Architecture Department | Lublin Municipality | Karsiyaka Municipality | Amsterdam University of Applied Sciences |
| A1P028: Affiliation | Municipality / Public Bodies | Research Center / University | Research Center / University | Municipality / Public Bodies | Municipality / Public Bodies | Research Center / University |
| A1P028: Other | ||||||
| A1P029: Email | Jaanus.tamm@tartu.ee | Jsalom@irec.cat | dwolinska@lublin.eu | ozlemkocaer2@gmail.com | o.shafqat@hva.nl | |
| Contact person for other special topics | ||||||
| A1P030: Name | Kaspar Alev | Hasan Burak Cavka | Omar Shafqat | |||
| A1P031: Email | Kaspar.alev@tartu.ee | hasancavka@iyte.edu.tr | o.shafqat@hva.nl | |||
| Pursuant to the General Data Protection Regulation | Yes | Yes | Yes | Yes | Yes | Yes |
| A2P001: Fields of application | ||||||
| A2P001: Fields of application |
|
|
|
|
|
|
| A2P001: Other | ||||||
| A2P002: Tools/strategies/methods applied for each of the above-selected fields | ||||||
| A2P002: Tools/strategies/methods applied for each of the above-selected fields | Energy efficiency: - buildings retrofitting - combined public and private financing - low temperature central heating - LED lighting Energy production: - installation of photovoltaic (PV) systems for renewable on-site energy production; Digital technologies: - smart-meters smart home system. Smart city information platform E-mobility - Installation of new charging stations for electric vehicles; - e-bike/bikesharing services implementation. Urban comfort and air quality - Control units for air pollutants concentration (PM2.5, PM10, NO2) - Sustainable Energy and Climate Action Plan - SECAP) | Energy SmartLab capacities - Building simulation model: thermal inertia and thermal loads of a building or community can be co-simulated with a building model. – System Operator and Aggregator simulation models: the interaction with remote control actions carried out by electricity System Operators or flexibility Aggregators can be simulated as well. – Grid simulation model: the physical interaction of the building with the grid power supply can be simulated enabling the experimental validation of flexibility services to the network. Energy SmartLab systems - SAFT Li-ion battery: maximum stored energy 20000 Wh, rated power 150 kW, rated discharge current 200 A, rated charge current 34 A, operating voltage 189 V – 227 V – 254 V, capacity 82 Ah. – Ultracapacitors: maximum stored energy 57 Wh, rated power 10 kW, rated current 20 A, peak current (<1s) 200 Apk, operating voltage 250 V – 500 V, capacity 1,65 F. – Electric vehicle second life battery: maximum stored energy 23300 Wh, rated power 40 kW, rated current 150 A, operating voltage 240 V – 400 V, capacity 32 Ah - 5 microgrid emulators (emulated power 5.5 kVA, max generation connected 10kVA, max consumption connected 10 kVA) - 1 grid emulator (Rated power: 200 kVA, Rated current per phase: 350 A, Rated current per neutral conductor: 35) | Energy efficiency: - buildings energy retrofit supported by tax incentives (110%, façade bonus, eco-bonus, sismabonus, renovation bonus, etc.); - several activities - such as Workshops, Webinars, Roundtables, Urban Trekking, etc…- are encouraged in the area to deepen knowledge and raise awareness on energy issues among urban stakeholders (householders, occupants, workers, etc..); - reduction in energy consumption also through every day energy saving actions. The spread of energy poverty phenomena in the area is considered urgent both for the medium-low-income population living in Pilastro and for small and medium-sized enterprises placed in Roveri; - Project for a One-stop-shop to guide residents and enterprises towards more conscious energy behaviours (planned in Bologna SECAP). Energy production: - installation of new photovoltaic (PV) systems for renewable on-site energy production; - presence of a waste to energy plant connected to the district heating system; - presence of a large PV plant in the CAAB area - 11,350,000 Kw/h Energy flexibility: - testing energy community and collective self-consumption feasibility in Pilastro area through an active citizens involvement process; - testing energy community feasibility among SMEs in Roveri industrial area; - testing the potential of complementary energy consumption profiles between residential area (Pilastro) and industrial area (Roveri). Digital technologies: - smart-meters installation in some dwellings in order to monitor consumption and suggest more sustainable energy behaviors; - Blog Pilastro as a tool to inform about the main activities and events ongoing in the area; E-mobility - Installation of new charging stations for electric vehicles; - e-bike/bikesharing services recovery (in fact during Covid-19 in the area Mobike service was suspended) and implementation. Urban comfort and air quality - Control units for air pollutants concentration (PM2.5, PM10, NO2); - Microclimatic simulation | SEE: D4.1 - Methodology and Guidelines for PED design https://makingcity.eu/results/#1551708358627-aefa76ef-66b2 | Methods involve studying the feasibility of digital PED references for the case cities about their energy, environmental, and economic performance by EnergyPlus tool. In case of insufficient energy data and the need of high resolution data, ‘Gaussian mixture model and expectation-maximization algorithm’ and ‘time-series decomposition-recombination’ method will be used to supplement data to EnergyPlus. The feasibility results will be returned to stakeholders for iterative discussion, and the iterative results will be used to update digital references. Replication plans are developed based on such a cooperation process for strategies to implement PEDs. If a PED is demonstrated during the project period, the measured data will be used to verify the feasibility model to optimize previous results (WP7– R3 & R4). In the MAKING-CITY project, the overall PED design method is developed, which will be further optimised in this project. In addition, PED-ACT will use the methods and knowledge, including how to choose a suitable PED in a city, energy balance calculation, and technologies available for PED. The RUGGEDISED project outputs the governance model into the replication plan in PED-ACT. Its ‘smart city open-data decision platform’ will illustrate an excellent example for the database in PED-ACT. The IEA EBC Annex 83 and Cost Action 19126 create the basis for data collection, developing existing PED databases, characterization of PED, and review of regulations of PED, as well as development of simulation tools. The UBEM project further enables a detailed high-resolution energy balance calculation of PED. | City vision, Innovation Ateliers |
| A2P003: Application of ISO52000 | ||||||
| A2P003: Application of ISO52000 | No | Yes | No | Yes | Yes | |
| A2P004: Appliances included in the calculation of the energy balance | ||||||
| A2P004: Appliances included in the calculation of the energy balance | Yes | Yes | No | Yes | Yes | No |
| A2P005: Mobility included in the calculation of the energy balance | ||||||
| A2P005: Mobility included in the calculation of the energy balance | No | Yes | No | No | No | No |
| A2P006: Description of how mobility is included (or not included) in the calculation | ||||||
| A2P006: Description of how mobility is included (or not included) in the calculation | – Electric vehicle second life battery: maximum stored energy 23300 Wh, rated power 40 kW, rated current 150 A, operating voltage 240 V – 400 V, capacity 32 Ah | Mobility is not included in the calculations. | ||||
| A2P007: Annual energy demand in buildings / Thermal demand | ||||||
| A2P007: Annual energy demand in buildings / Thermal demand [GWh/annum] | 9.1 | 3.862 | ||||
| A2P008: Annual energy demand in buildings / Electric Demand | ||||||
| A2P008: Annual energy demand in buildings / Electric Demand [GWh/annum] | 1.226 | |||||
| A2P009: Annual energy demand for e-mobility | ||||||
| A2P009: Annual energy demand for e-mobility [GWh/annum] | ||||||
| A2P010: Annual energy demand for urban infrastructure | ||||||
| A2P010: Annual energy demand for urban infrastructure [GWh/annum] | ||||||
| A2P011: Annual renewable electricity production on-site during target year | ||||||
| A2P011: PV | yes | yes | yes | no | yes | yes |
| A2P011: PV - specify production in GWh/annum [GWh/annum] | 1.028 | |||||
| A2P011: Wind | no | no | no | no | no | no |
| A2P011: Wind - specify production in GWh/annum [GWh/annum] | ||||||
| A2P011: Hydro | no | no | no | no | no | no |
| A2P011: Hydro - specify production in GWh/annum [GWh/annum] | ||||||
| A2P011: Biomass_el | no | no | no | no | no | yes |
| A2P011: Biomass_el - specify production in GWh/annum [GWh/annum] | ||||||
| A2P011: Biomass_peat_el | no | no | no | no | no | no |
| A2P011: Biomass_peat_el - specify production in GWh/annum [GWh/annum] | ||||||
| A2P011: PVT_el | no | no | no | no | no | no |
| A2P011: PVT_el - specify production in GWh/annum [GWh/annum] | ||||||
| A2P011: Other | no | no | no | no | no | no |
| A2P011: Other - specify production in GWh/annum [GWh/annum] | ||||||
| A2P012: Annual renewable thermal production on-site during target year | ||||||
| A2P012: Geothermal | no | no | no | no | no | yes |
| A2P012 - Geothermal: Please specify production in GWh/annum [GWh/annum] | ||||||
| A2P012: Solar Thermal | yes | no | yes | no | no | no |
| A2P012 - Solar Thermal: Please specify production in GWh/annum [GWh/annum] | 0.5 | |||||
| A2P012: Biomass_heat | no | no | yes | no | no | yes |
| A2P012 - Biomass_heat: Please specify production in GWh/annum [GWh/annum] | ||||||
| A2P012: Waste heat+HP | no | no | no | no | no | yes |
| A2P012 - Waste heat+HP: Please specify production in GWh/annum [GWh/annum] | ||||||
| A2P012: Biomass_peat_heat | no | no | no | no | no | no |
| A2P012 - Biomass_peat_heat: Please specify production in GWh/annum [GWh/annum] | ||||||
| A2P012: PVT_th | no | no | no | no | no | no |
| A2P012 - PVT_th: Please specify production in GWh/annum [GWh/annum] | ||||||
| A2P012: Biomass_firewood_th | no | no | no | no | no | no |
| A2P012 - Biomass_firewood_th: Please specify production in GWh/annum [GWh/annum] | ||||||
| A2P012: Other | no | no | no | no | no | no |
| A2P012 - Other: Please specify production in GWh/annum [GWh/annum] | ||||||
| A2P013: Renewable resources on-site - Additional notes | ||||||
| A2P013: Renewable resources on-site - Additional notes | ||||||
| A2P014: Annual energy use | ||||||
| A2P014: Annual energy use [GWh/annum] | 5.088 | |||||
| A2P015: Annual energy delivered | ||||||
| A2P015: Annual energy delivered [GWh/annum] | ||||||
| A2P016: Annual non-renewable electricity production on-site during target year | ||||||
| A2P016: Annual non-renewable electricity production on-site during target year [GWh/annum] | ||||||
| A2P017: Annual non-renewable thermal production on-site during target year | ||||||
| A2P017: Gas | no | yes | no | no | yes | yes |
| A2P017 - Gas: Annual non-renewable thermal production on-site during target year [GWh/annum] | ||||||
| A2P017: Coal | no | no | no | no | no | yes |
| A2P017 - Coal: Annual non-renewable thermal production on-site during target year [GWh/annum] | ||||||
| A2P017: Oil | no | no | no | no | no | yes |
| A2P017 - Oil: Annual non-renewable thermal production on-site during target year [GWh/annum] | ||||||
| A2P017: Other | no | no | no | no | no | no |
| A2P017 - Other: Annual non-renewable thermal production on-site during target year [GWh/annum] | ||||||
| A2P018: Annual renewable electricity imports from outside the boundary during target year | ||||||
| A2P018: PV | no | no | no | no | yes | yes |
| A2P018 - PV: specify production in GWh/annum if available [GWh/annum] | 0.707 | |||||
| A2P018: Wind | no | no | no | no | no | yes |
| A2P018 - Wind: specify production in GWh/annum if available [GWh/annum] | ||||||
| A2P018: Hydro | no | no | no | no | no | yes |
| A2P018 - Hydro: specify production in GWh/annum if available [GWh/annum] | ||||||
| A2P018: Biomass_el | no | no | no | no | no | yes |
| A2P018 - Biomass_el: specify production in GWh/annum if available [GWh/annum] | ||||||
| A2P018: Biomass_peat_el | no | no | no | no | no | yes |
| A2P018 - Biomass_peat_el: specify production in GWh/annum if available [GWh/annum] | ||||||
| A2P018: PVT_el | no | no | no | no | no | yes |
| A2P018 - PVT_el: specify production in GWh/annum if available [GWh/annum] | ||||||
| A2P018: Other | no | no | no | no | no | no |
| A2P018 - Other: specify production in GWh/annum if available [GWh/annum] | ||||||
| A2P019: Annual renewable thermal imports from outside the boundary during target year | ||||||
| A2P019: Geothermal | no | no | no | no | no | yes |
| A2P019 Geothermal: Please specify imports in GWh/annum [GWh/annum] | ||||||
| A2P019: Solar Thermal | no | no | no | no | no | yes |
| A2P019 Solar Thermal: Please specify imports in GWh/annum [GWh/annum] | ||||||
| A2P019: Biomass_heat | no | no | no | no | no | yes |
| A2P019 Biomass_heat: Please specify imports in GWh/annum [GWh/annum] | ||||||
| A2P019: Waste heat+HP | no | no | no | no | no | yes |
| A2P019 Waste heat+HP: Please specify imports in GWh/annum [GWh/annum] | ||||||
| A2P019: Biomass_peat_heat | no | no | no | no | no | yes |
| A2P019 Biomass_peat_heat: Please specify imports in GWh/annum [GWh/annum] | ||||||
| A2P019: PVT_th | no | no | no | no | no | yes |
| A2P019 PVT_th: Please specify imports in GWh/annum [GWh/annum] | ||||||
| A2P019: Biomass_firewood_th | no | no | no | no | no | yes |
| A2P019 Biomass_firewood_th: Please specify imports in GWh/annum [GWh/annum] | ||||||
| A2P019: Other | no | no | no | no | no | no |
| A2P019 Other: Please specify imports in GWh/annum [GWh/annum] | ||||||
| A2P020: Share of RES on-site / RES outside the boundary | ||||||
| A2P020: Share of RES on-site / RES outside the boundary | 0 | 0 | 0 | 0 | 1.4540311173975 | 0 |
| A2P021: GHG-balance calculated for the PED | ||||||
| A2P021: GHG-balance calculated for the PED [tCO2/annum] | 980 | 250 | ||||
| A2P022: KPIs related to the PED case study / PED Lab | ||||||
| A2P022: Safety & Security | ||||||
| A2P022: Health | ||||||
| A2P022: Education | ||||||
| A2P022: Mobility | ||||||
| A2P022: Energy | ||||||
| A2P022: Water | ||||||
| A2P022: Economic development | ||||||
| A2P022: Housing and Community | ||||||
| A2P022: Waste | ||||||
| A2P022: Other | ||||||
| A2P023: Technological Solutions / Innovations - Energy Generation | ||||||
| A2P023: Photovoltaics | yes | yes | yes | yes | yes | yes |
| A2P023: Solar thermal collectors | no | no | yes | no | no | no |
| A2P023: Wind Turbines | no | no | no | no | no | no |
| A2P023: Geothermal energy system | no | no | yes | no | no | yes |
| A2P023: Waste heat recovery | no | no | no | no | no | yes |
| A2P023: Waste to energy | no | no | yes | no | no | yes |
| A2P023: Polygeneration | no | no | no | no | no | no |
| A2P023: Co-generation | no | no | yes | no | no | no |
| A2P023: Heat Pump | no | no | yes | yes | yes | yes |
| A2P023: Hydrogen | no | no | no | yes | no | no |
| A2P023: Hydropower plant | no | no | no | no | no | no |
| A2P023: Biomass | yes | no | no | no | no | yes |
| A2P023: Biogas | yes | no | no | no | no | yes |
| A2P023: Other | ||||||
| A2P024: Technological Solutions / Innovations - Energy Flexibility | ||||||
| A2P024: A2P024: Information and Communication Technologies (ICT) | yes | yes | yes | yes | no | yes |
| A2P024: Energy management system | yes | yes | no | yes | no | yes |
| A2P024: Demand-side management | no | no | no | yes | no | yes |
| A2P024: Smart electricity grid | no | yes | no | yes | no | yes |
| A2P024: Thermal Storage | no | no | no | yes | no | yes |
| A2P024: Electric Storage | no | yes | yes | yes | no | yes |
| A2P024: District Heating and Cooling | yes | no | yes | yes | no | yes |
| A2P024: Smart metering and demand-responsive control systems | no | no | no | yes | no | yes |
| A2P024: P2P – buildings | no | no | no | no | no | yes |
| A2P024: Other | ||||||
| A2P025: Technological Solutions / Innovations - Energy Efficiency | ||||||
| A2P025: Deep Retrofitting | yes | no | yes | yes | yes | yes |
| A2P025: Energy efficiency measures in historic buildings | no | no | no | yes | no | yes |
| A2P025: High-performance new buildings | no | no | yes | yes | no | yes |
| A2P025: Smart Public infrastructure (e.g. smart lighting) | yes | no | yes | yes | no | yes |
| A2P025: Urban data platforms | yes | no | no | yes | no | yes |
| A2P025: Mobile applications for citizens | yes | no | yes | yes | no | yes |
| A2P025: Building services (HVAC & Lighting) | no | yes | yes | yes | yes | yes |
| A2P025: Smart irrigation | no | no | no | no | no | yes |
| A2P025: Digital tracking for waste disposal | no | no | yes | no | no | yes |
| A2P025: Smart surveillance | yes | no | yes | no | no | no |
| A2P025: Other | ||||||
| A2P026: Technological Solutions / Innovations - Mobility | ||||||
| A2P026: Efficiency of vehicles (public and/or private) | yes | yes | yes | yes | no | yes |
| A2P026: Measures to reduce traffic volume (e.g. measure to support public transportation, shared mobility, measure to reduce journeys and distances) | yes | no | yes | yes | no | yes |
| A2P026: e-Mobility | yes | no | yes | yes | no | yes |
| A2P026: Soft mobility infrastructures and last mile solutions | no | no | yes | no | no | yes |
| A2P026: Car-free area | no | no | no | no | no | yes |
| A2P026: Other | ||||||
| A2P027: Mobility strategies - Additional notes | ||||||
| A2P027: Mobility strategies - Additional notes | ||||||
| A2P028: Energy efficiency certificates | ||||||
| A2P028: Energy efficiency certificates | Yes | Yes | No | No | ||
| A2P028: If yes, please specify and/or enter notes | Energy Performance Certificate for each dwelling | |||||
| A2P029: Any other building / district certificates | ||||||
| A2P029: Any other building / district certificates | No | No | No | |||
| A2P029: If yes, please specify and/or enter notes | ||||||
| A3P001: Relevant city /national strategy | ||||||
| A3P001: Relevant city /national strategy |
|
|
|
|
|
|
| A3P002: Quantitative targets included in the city / national strategy | ||||||
| A3P002: Quantitative targets included in the city / national strategy | City level targets Sustainable Urban Mobility Plan (PUMS) - 2019 | Targets: - by 2030 440,000 daily trips will no longer be made by car but on foot, by bike or by public transport; - by 2030 12% of vehicles will be electric; Sustainable Energy and Climate Action Plan (SECAP) - 2021 | Targets: - by 2025 deep renovation of 3% per year of residential homes (insulation of building envelopes and adoption of heat pump heating system); - by 2030 reduction of electricity consumption at least of 20% compared to 2018; - by 2030 100% coverage of electricity consumption for municipal buildings; - by 2030 increase public green areas by at least 10% Urban General Plan (PUG) - 2021 | Targets: - by 2030 net zero land consumption; National level targets Integrated National Energy and Climate Plan - 2020 | Targets: - by 2030 reduction of 43% for primary energy consumption, with respect to the reference 2007 scenario. - by 2030 increase of 30% of energy production from renewable sources; - by 2025 energy generation for electricity independent from the use of coal; | Karşıyaka Municipality is the first local government in Turkey to sign the Covenant of Mayors in 2011. During this period, the greenhouse gas inventory of the district was carried out three times and reduction targets were set for 2020 and 2030. In the 2021 Sustainable Energy and Climate Action Plan prepared as of the end of 2021, Karşıyaka Municipality has targeted a 40% reduction in its emissions for 2030 compared to the base year 2018. In the 2021 Sustainable Energy and Climate Action Plan, Karşıyaka Municipality aims to reduce its greenhouse gas emissions from 3.96 tCO2e / person in 2018 to 2.37 tCO2e / person in 2030. System solutions such as the use of renewable energy sources, air, ground or water source heat pump, cogeneration and microcogeneration are analysed by designers in order to fully or partially meet the energy requirements for heating, cooling, ventilation, hot water, electricity and lighting for all buildings with a floor area of less than 20,000 square metres. If at least 50% of the building's total energy consumption costs are covered by one or more of these applications, the points are taken in the assessment table in the Building and housing estate business certification guide of 2023. | ||||
| A3P003: Strategies towards decarbonization of the gas grid | ||||||
| A3P003: Strategies towards decarbonization of the gas grid |
|
|
|
|
| |
| A3P003: Other | Heating Grid | |||||
| A3P004: Identification of needs and priorities | ||||||
| A3P004: Identification of needs and priorities | -Allows for real physical equipment to be operated under a broad range of scenarios without depending on the real occurrence of the boundary conditions suitable for the experimental validation -Pioneer in addressing the concept and implementation of Microgrids and aims to become a leading experimental facility for improving the optimal development of Flexible Energy Buildings and Flexibility Aggregation. | Bologna needs to reach the climate neutrality proceeding by ‘part’ of the city. Pilastro-Roveri is a promising district due to the following reasons: - some buildings need to be renovated both to increase the energy performance, the seismic behaviour, spaces liveability and comfort; - Pilastro is a residential area with the presence of a high percentage of vulnerable inhabitants affected by energy poverty phenomenon. This situation needs to be prioritized; - Pilastro is characterized by the presence of large underused green spaces that can represent a valuable resource for social cohesion and for heat island phenomenon mitigation; - Roveri is an industrial area where some small-medium enterprises are investing in order to improve their facilities and to efficiency their production cycle; - Roveri and Pilastro areas present complementary energy consumption curves throughout the day/week with a high potential for energy sharing and flexibility. | According to the model developed for the district, the electrification of heating and cooling is necessary.Therefore, there needs to be the implementation of a heat pump. The building-integrated photovoltaic panelsshould follow. Through net-metering practices, the district is expected to reach energy positivity throughthis scenario. | |||
| A3P005: Sustainable behaviour | ||||||
| A3P005: Sustainable behaviour | -Improving the development of Net Zero Energy Buildings and Flexible Energy buildings. | Bologna SECAP, as well as the participation to the 100 Climate-Neutral Cities, promotes the PED model as an enabling tool to foster city energy transition process. In Pilastro-Roveri district two main sustainable behaviours approaches can be identified: - bottom-up approach - some citizens are joining forces to create groups of energy self-consumption, in view of energy communities’ implementation and, at the same time, some companies have already undertaken some efficiency intervention on the production system by leveraging highly energy-efficient technologies; - top-down approach - GECO and GRETA are international ongoing projects on the area that promote innovation and energy transition with important fundings from the European Union, but with a particular focus on citizen engagement and participatory approach. Simultaneously, new and updated planning tools such as PUG, SECAP and SUMP identify in this part of Bologna city a key area to enable an ecological transition process holding together all relevant stakeholders - citizens, small-medium enterprises and Institutions. These two thrusts (bottom-up and top-down) need to be optimized in view of a participatory pathway towards the grounding of a Positive Energy District in Pilastro-Roveri. | ||||
| A3P006: Economic strategies | ||||||
| A3P006: Economic strategies |
|
|
|
| ||
| A3P006: Other | ||||||
| A3P007: Social models | ||||||
| A3P007: Social models |
|
|
|
|
|
|
| A3P007: Other | ||||||
| A3P008: Integrated urban strategies | ||||||
| A3P008: Integrated urban strategies |
|
|
|
|
| |
| A3P008: Other | ||||||
| A3P009: Environmental strategies | ||||||
| A3P009: Environmental strategies |
|
|
|
|
|
|
| A3P009: Other | ||||||
| A3P010: Legal / Regulatory aspects | ||||||
| A3P010: Legal / Regulatory aspects | - European Commission has legislated on Energy Community (‘Renewable energy’ directive - 2018/2001/EU and ‘Common rules for the internal electricity market’ directive- 2019/944/EU). - Spanish building certification is regulated through Royal Decree 235/2013. | PEDs in Italy are meant as strategies towards climate-neutrality: at national/regional/local level a specific legislation on PEDs development is not yet available. However, the European Commission has legislated on Energy Community (‘Renewable energy’ directive - 2018/2001/EU and ‘Common rules for the internal electricity market’ directive- 2019/944/EU). Italy, starting from 2020, has transposed the Directives at national level (‘Milleproroghe’ decree then made effective by ‘Promotion of Renewable sources’ decree 199/2021). At regional level Emilia Romagna in May 2022 developed a law encouraging EC model diffusion (LR 5/2022 ‘Promotion and support of renewable energy communities and renewable energy self-consumers acting collectively’). Energy Community, according to Lindholm et al. 2021, can be considered as ‘a first implementation step towards PEDs.’ | Regulatory sandbox | |||
| B1P001: PED/PED relevant concept definition | ||||||
| B1P001: PED/PED relevant concept definition | Pilastro-Roveri district can be considered as a PED-relevant area. Even though at the moment the area doesn’t meet annual energy positive balance, it addresses some relevant key aspects listed in the JPI UE PED Framework Definition such as: - high level of aspiration in terms of energy efficiency, energy flexibility and energy production; - integration of different systems and infrastructures; - inclusion of aspects not only related to energy sector, but also connected with social, economic and environmental sustainability. | The pilot area was selected on the basis of several criteria: its location within areas prioritised by Karşıyaka Municipality for combating climate change, compliance with the building regulations set out in the Green Building-Site-Operation (2023) guide, which are in line with Municipality's energy policy, the presence of open spaces that allow various applications for renewable energy, proximity to public facilities such as schools and municipal services, the availability of data on energy consumption (e.g. electricity and natural gas bills) and architectural features, the potential for community building, the suitability for solar energy systems, considering orientation and roof structure, and the potential for future building renovations. The aim of the initiative is to explore the feasibility of transforming the district into a Positive Energy District (PED). | Functional PED | |||
| B1P002: Motivation behind PED/PED relevant project development | ||||||
| B1P002: Motivation behind PED/PED relevant project development | Pilastro-Roveri district is not actually meant to become a PEDs. However, it can be considered as a PED-relevant case-study since a participatory transition pathway towards a more sustainable, efficient and resilient district is gaining ground, involving the main urban stakeholders. At the same time, the most recent city plan and policies (such as the city SECAPs - updated in 2021) are promoting PED model as a key strategy to guide Bologna towards climate neutrality by 2030. | Brown field development of a former industrial neighbourhood into a low-carbon, smart Positive Energy District with mixed uses. | ||||
| B1P003: Environment of the case study area | ||||||
| B2P003: Environment of the case study area | Urban area | Urban area | Urban area | Urban area | ||
| B1P004: Type of district | ||||||
| B2P004: Type of district |
|
|
|
| ||
| B1P005: Case Study Context | ||||||
| B1P005: Case Study Context |
|
|
|
| ||
| B1P006: Year of construction | ||||||
| B1P006: Year of construction | 2005 | |||||
| B1P007: District population before intervention - Residential | ||||||
| B1P007: District population before intervention - Residential | 4500 | |||||
| B1P008: District population after intervention - Residential | ||||||
| B1P008: District population after intervention - Residential | ||||||
| B1P009: District population before intervention - Non-residential | ||||||
| B1P009: District population before intervention - Non-residential | ||||||
| B1P010: District population after intervention - Non-residential | ||||||
| B1P010: District population after intervention - Non-residential | ||||||
| B1P011: Population density before intervention | ||||||
| B1P011: Population density before intervention | 0 | 0 | 0 | 0 | 0 | 0 |
| B1P012: Population density after intervention | ||||||
| B1P012: Population density after intervention | 0 | 0 | 0 | 0 | 0 | 0 |
| B1P013: Building and Land Use before intervention | ||||||
| B1P013: Residential | yes | no | yes | no | yes | no |
| B1P013 - Residential: Specify the sqm [m²] | 102795 | |||||
| B1P013: Office | no | no | yes | no | no | no |
| B1P013 - Office: Specify the sqm [m²] | ||||||
| B1P013: Industry and Utility | no | no | yes | no | no | yes |
| B1P013 - Industry and Utility: Specify the sqm [m²] | ||||||
| B1P013: Commercial | yes | no | yes | no | no | no |
| B1P013 - Commercial: Specify the sqm [m²] | ||||||
| B1P013: Institutional | no | no | yes | no | no | no |
| B1P013 - Institutional: Specify the sqm [m²] | ||||||
| B1P013: Natural areas | yes | no | yes | no | no | no |
| B1P013 - Natural areas: Specify the sqm [m²] | ||||||
| B1P013: Recreational | yes | no | yes | no | no | no |
| B1P013 - Recreational: Specify the sqm [m²] | ||||||
| B1P013: Dismissed areas | no | no | yes | no | no | no |
| B1P013 - Dismissed areas: Specify the sqm [m²] | ||||||
| B1P013: Other | no | no | no | no | no | no |
| B1P013 - Other: Specify the sqm [m²] | ||||||
| B1P014: Building and Land Use after intervention | ||||||
| B1P014: Residential | yes | no | yes | no | yes | yes |
| B1P014 - Residential: Specify the sqm [m²] | 102795 | |||||
| B1P014: Office | no | no | yes | no | no | yes |
| B1P014 - Office: Specify the sqm [m²] | ||||||
| B1P014: Industry and Utility | no | no | yes | no | no | no |
| B1P014 - Industry and Utility: Specify the sqm [m²] | ||||||
| B1P014: Commercial | yes | no | yes | no | no | yes |
| B1P014 - Commercial: Specify the sqm [m²] | ||||||
| B1P014: Institutional | no | no | yes | no | no | no |
| B1P014 - Institutional: Specify the sqm [m²] | ||||||
| B1P014: Natural areas | yes | no | yes | no | no | no |
| B1P014 - Natural areas: Specify the sqm [m²] | ||||||
| B1P014: Recreational | yes | no | yes | no | no | yes |
| B1P014 - Recreational: Specify the sqm [m²] | ||||||
| B1P014: Dismissed areas | no | no | yes | no | no | no |
| B1P014 - Dismissed areas: Specify the sqm [m²] | ||||||
| B1P014: Other | no | no | no | no | no | no |
| B1P014 - Other: Specify the sqm [m²] | ||||||
| B2P001: PED Lab concept definition | ||||||
| B2P001: PED Lab concept definition | addressing the concept and implementation of Microgrids and aims to become a leading experimental facility for improving the optimal development of Flexible Energy Buildings and Flexibility Aggregation | |||||
| B2P002: Installation life time | ||||||
| B2P002: Installation life time | ||||||
| B2P003: Scale of action | ||||||
| B2P003: Scale | District | Virtual | District | |||
| B2P004: Operator of the installation | ||||||
| B2P004: Operator of the installation | IREC | |||||
| B2P005: Replication framework: Applied strategy to reuse and recycling the materials | ||||||
| B2P005: Replication framework: Applied strategy to reuse and recycling the materials | ||||||
| B2P006: Circular Economy Approach | ||||||
| B2P006: Do you apply any strategy to reuse and recycling the materials? | No | No | Yes | |||
| B2P006: Other | ||||||
| B2P007: Motivation for developing the PED Lab | ||||||
| B2P007: Motivation for developing the PED Lab |
|
|
| |||
| B2P007: Other | ||||||
| B2P008: Lead partner that manages the PED Lab | ||||||
| B2P008: Lead partner that manages the PED Lab | Municipality | Research center/University | Municipality | |||
| B2P008: Other | ||||||
| B2P009: Collaborative partners that participate in the PED Lab | ||||||
| B2P009: Collaborative partners that participate in the PED Lab |
|
| ||||
| B2P009: Other | ||||||
| B2P010: Synergies between the fields of activities | ||||||
| B2P010: Synergies between the fields of activities | ||||||
| B2P011: Available facilities to test urban configurations in PED Lab | ||||||
| B2P011: Available facilities to test urban configurations in PED Lab |
|
|
| |||
| B2P011: Other | ||||||
| B2P012: Incubation capacities of PED Lab | ||||||
| B2P012: Incubation capacities of PED Lab |
|
|
| |||
| B2P013: Availability of the facilities for external people | ||||||
| B2P013: Availability of the facilities for external people | ||||||
| B2P014: Monitoring measures | ||||||
| B2P014: Monitoring measures |
|
|
| |||
| B2P015: Key Performance indicators | ||||||
| B2P015: Key Performance indicators |
|
|
| |||
| B2P016: Execution of operations | ||||||
| B2P016: Execution of operations | ||||||
| B2P017: Capacities | ||||||
| B2P017: Capacities | - Building simulation model: thermal inertia and thermal loads of a building or community can be co-simulated with a building model. – System Operator and Aggregator simulation models: the interaction with remote control actions carried out by electricity System Operators or flexibility Aggregators can be simulated as well. – Grid simulation model: the physical interaction of the building with the grid power supply can be simulated enabling the experimental validation of flexibility services to the network. | |||||
| B2P018: Relations with stakeholders | ||||||
| B2P018: Relations with stakeholders | ||||||
| B2P019: Available tools | ||||||
| B2P019: Available tools |
|
| ||||
| B2P019: Available tools | ||||||
| B2P020: External accessibility | ||||||
| B2P020: External accessibility | ||||||
| C1P001: Unlocking Factors | ||||||
| C1P001: Recent technological improvements for on-site RES production | 3 - Moderately important | 1 - Unimportant | 4 - Important | 5 - Very important | 5 - Very important | 4 - Important |
| C1P001: Innovative, integrated, prefabricated packages for buildings envelope / Energy efficiency of building stock | 4 - Important | 1 - Unimportant | 4 - Important | 5 - Very important | 4 - Important | 5 - Very important |
| C1P001: Energy Communities, P2P, Prosumers concepts | 3 - Moderately important | 3 - Moderately important | 5 - Very important | 1 - Unimportant | 1 - Unimportant | 3 - Moderately important |
| C1P001: Storage systems and E-mobility market penetration | 2 - Slightly important | 5 - Very important | 3 - Moderately important | 5 - Very important | 1 - Unimportant | 3 - Moderately important |
| C1P001: Decreasing costs of innovative materials | 3 - Moderately important | 3 - Moderately important | 3 - Moderately important | 5 - Very important | 5 - Very important | 3 - Moderately important |
| C1P001: Financial mechanisms to reduce costs and maximize benefits | 4 - Important | 5 - Very important | 5 - Very important | 5 - Very important | 4 - Important | 3 - Moderately important |
| C1P001: The ability to predict Multiple Benefits | 3 - Moderately important | 4 - Important | 4 - Important | 5 - Very important | 4 - Important | 3 - Moderately important |
| C1P001: The ability to predict the distribution of benefits and impacts | 4 - Important | 4 - Important | 1 - Unimportant | 5 - Very important | 4 - Important | 1 - Unimportant |
| C1P001: Citizens improved awareness and engagement on sustainable energy issues (bottom-up) | 4 - Important | 1 - Unimportant | 5 - Very important | 5 - Very important | 2 - Slightly important | 2 - Slightly important |
| C1P001: Social acceptance (top-down) | 4 - Important | 1 - Unimportant | 3 - Moderately important | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P001: Improved local and national policy frameworks (i.e. incentives, laws etc.) | 3 - Moderately important | 1 - Unimportant | 4 - Important | 5 - Very important | 5 - Very important | 2 - Slightly important |
| C1P001: Presence of integrated urban strategies and plans | 5 - Very important | 1 - Unimportant | 5 - Very important | 5 - Very important | 5 - Very important | 3 - Moderately important |
| C1P001: Multidisciplinary approaches available for systemic integration | 4 - Important | 4 - Important | 4 - Important | 5 - Very important | 4 - Important | 4 - Important |
| C1P001: Availability of grants (from EC or other donors) to finance the PED Lab projects | 5 - Very important | 5 - Very important | 4 - Important | 5 - Very important | 5 - Very important | 4 - Important |
| C1P001: Availability of RES on site (Local RES) | 4 - Important | 4 - Important | 4 - Important | 5 - Very important | 5 - Very important | 3 - Moderately important |
| C1P001: Ongoing or established collaboration on Public Private Partnership among key stakeholders | 4 - Important | 5 - Very important | 3 - Moderately important | 5 - Very important | 5 - Very important | 2 - Slightly important |
| C1P001: Any other UNLOCKING FACTORS | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant |
| C1P001: Any other UNLOCKING FACTORS (if any) | ||||||
| C1P002: Driving Factors | ||||||
| C1P002: Climate Change adaptation need | 5 - Very important | 4 - Important | 4 - Important | 5 - Very important | 5 - Very important | 5 - Very important |
| C1P002: Climate Change mitigation need (local RES production and efficiency) | 5 - Very important | 4 - Important | 5 - Very important | 5 - Very important | 5 - Very important | 5 - Very important |
| C1P002: Rapid urbanization trend and need of urban expansions | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 3 - Moderately important | 3 - Moderately important |
| C1P002: Urban re-development of existing built environment | 3 - Moderately important | 4 - Important | 5 - Very important | 5 - Very important | 3 - Moderately important | 5 - Very important |
| C1P002: Economic growth need | 2 - Slightly important | 4 - Important | 3 - Moderately important | 5 - Very important | 4 - Important | 1 - Unimportant |
| C1P002: Improved local environmental quality (air, noise, aesthetics, etc.) | 4 - Important | 4 - Important | 4 - Important | 5 - Very important | 5 - Very important | 4 - Important |
| C1P002: Territorial and market attractiveness | 3 - Moderately important | 1 - Unimportant | 3 - Moderately important | 5 - Very important | 5 - Very important | 4 - Important |
| C1P002: Energy autonomy/independence | 4 - Important | 5 - Very important | 4 - Important | 5 - Very important | 5 - Very important | 2 - Slightly important |
| C1P002: Any other DRIVING FACTOR | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant |
| C1P002: Any other DRIVING FACTOR (if any) | ||||||
| C1P003: Administrative barriers | ||||||
| C1P003: Difficulty in the coordination of high number of partners and authorities | 4 - Important | 4 - Important | 4 - Important | 5 - Very important | 4 - Important | 2 - Slightly important |
| C1P003: Lack of good cooperation and acceptance among partners | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 5 - Very important | 3 - Moderately important | 1 - Unimportant |
| C1P003: Lack of public participation | 1 - Unimportant | 2 - Slightly important | 2 - Slightly important | 5 - Very important | 5 - Very important | 2 - Slightly important |
| C1P003: Lack of institutions/mechanisms to disseminate information | 3 - Moderately important | 3 - Moderately important | 3 - Moderately important | 5 - Very important | 4 - Important | 1 - Unimportant |
| C1P003:Long and complex procedures for authorization of project activities | 5 - Very important | 5 - Very important | 5 - Very important | 5 - Very important | 3 - Moderately important | 1 - Unimportant |
| C1P003: Time consuming requirements by EC or other donors concerning reporting and accountancy | 4 - Important | 5 - Very important | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P003: Complicated and non-comprehensive public procurement | 4 - Important | 3 - Moderately important | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P003: Fragmented and or complex ownership structure | 5 - Very important | 5 - Very important | 5 - Very important | 5 - Very important | 5 - Very important | 2 - Slightly important |
| C1P003: City administration & cross-sectoral attitude/approaches (silos) | 5 - Very important | 4 - Important | 5 - Very important | 5 - Very important | 5 - Very important | 3 - Moderately important |
| C1P003: Lack of internal capacities to support energy transition | 4 - Important | 4 - Important | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P003: Any other Administrative BARRIER | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant |
| C1P003: Any other Administrative BARRIER (if any) | ||||||
| C1P004: Policy barriers | ||||||
| C1P004: Lack of long-term and consistent energy plans and policies | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 5 - Very important | 2 - Slightly important |
| C1P004: Lacking or fragmented local political commitment and support on the long term | 2 - Slightly important | 1 - Unimportant | 2 - Slightly important | 5 - Very important | 4 - Important | 1 - Unimportant |
| C1P004: Lack of Cooperation & support between national-regional-local entities | 3 - Moderately important | 2 - Slightly important | 3 - Moderately important | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P004: Any other Political BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant |
| C1P004: Any other Political BARRIER (if any) | ||||||
| C1P005: Legal and Regulatory barriers | ||||||
| C1P005: Inadequate regulations for new technologies | 4 - Important | 5 - Very important | 4 - Important | 5 - Very important | 5 - Very important | 3 - Moderately important |
| C1P005: Regulatory instability | 3 - Moderately important | 2 - Slightly important | 3 - Moderately important | 5 - Very important | 5 - Very important | 3 - Moderately important |
| C1P005: Non-effective regulations | 4 - Important | 2 - Slightly important | 4 - Important | 5 - Very important | 5 - Very important | 2 - Slightly important |
| C1P005: Unfavorable local regulations for innovative technologies | 2 - Slightly important | 4 - Important | 2 - Slightly important | 5 - Very important | 5 - Very important | 2 - Slightly important |
| C1P005: Building code and land-use planning hindering innovative technologies | 2 - Slightly important | 3 - Moderately important | 1 - Unimportant | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P005: Insufficient or insecure financial incentives | 3 - Moderately important | 5 - Very important | 4 - Important | 5 - Very important | 4 - Important | 3 - Moderately important |
| C1P005: Unresolved privacy concerns and limiting nature of privacy protection regulation | 4 - Important | 1 - Unimportant | 4 - Important | 5 - Very important | 3 - Moderately important | 2 - Slightly important |
| C1P005: Shortage of proven and tested solutions and examples | 2 - Slightly important | 4 - Important | 2 - Slightly important | 5 - Very important | 3 - Moderately important | 2 - Slightly important |
| C1P005: Any other Legal and Regulatory BARRIER | 1 - Unimportant | 4 - Important | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant |
| C1P005: Any other Legal and Regulatory BARRIER (if any) | ||||||
| C1P006: Environmental barriers | ||||||
| C1P006: Environmental barriers | - Climate Variability: 5 - Topographical Constraints: 4 - Sunlight Availability: 5 - Environmental Regulations: 3 - Zoning Restrictions: 2 - Air and Water Pollution: 2 - Natural Disasters: 1 - Water Scarcity: 1 | |||||
| C1P007: Technical barriers | ||||||
| C1P007: Lack of skilled and trained personnel | 3 - Moderately important | 5 - Very important | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P007: Deficient planning | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 5 - Very important | 4 - Important | 2 - Slightly important |
| C1P007: Retrofitting work in dwellings in occupied state | 5 - Very important | 1 - Unimportant | 5 - Very important | 5 - Very important | 5 - Very important | 3 - Moderately important |
| C1P007: Lack of well-defined process | 3 - Moderately important | 4 - Important | 5 - Very important | 1 - Unimportant | 4 - Important | 3 - Moderately important |
| C1P007: Inaccuracy in energy modelling and simulation | 2 - Slightly important | 5 - Very important | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P007: Lack/cost of computational scalability | 3 - Moderately important | 4 - Important | 4 - Important | 1 - Unimportant | 4 - Important | 2 - Slightly important |
| C1P007: Grid congestion, grid instability | 2 - Slightly important | 5 - Very important | 4 - Important | 5 - Very important | 3 - Moderately important | 5 - Very important |
| C1P007: Negative effects of project intervention on the natural environment | 1 - Unimportant | 1 - Unimportant | 2 - Slightly important | 5 - Very important | 3 - Moderately important | 1 - Unimportant |
| C1P007: Energy retrofitting work in dense and/or historical urban environment | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 5 - Very important | 4 - Important | 1 - Unimportant |
| C1P007: Difficult definition of system boundaries | 5 - Very important | 1 - Unimportant | 5 - Very important | 5 - Very important | 4 - Important | 3 - Moderately important |
| C1P007: Any other Thecnical BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant |
| C1P007: Any other Thecnical BARRIER (if any) | ||||||
| C1P008: Social and Cultural barriers | ||||||
| C1P008: Inertia | 4 - Important | 4 - Important | 2 - Slightly important | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P008: Lack of values and interest in energy optimization measurements | 3 - Moderately important | 5 - Very important | 3 - Moderately important | 5 - Very important | 4 - Important | 1 - Unimportant |
| C1P008: Low acceptance of new projects and technologies | 2 - Slightly important | 5 - Very important | 3 - Moderately important | 5 - Very important | 5 - Very important | 3 - Moderately important |
| C1P008: Difficulty of finding and engaging relevant actors | 3 - Moderately important | 5 - Very important | 4 - Important | 5 - Very important | 4 - Important | 1 - Unimportant |
| C1P008: Lack of trust beyond social network | 2 - Slightly important | 3 - Moderately important | 5 - Very important | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P008: Rebound effect | 3 - Moderately important | 4 - Important | 4 - Important | 5 - Very important | 5 - Very important | 1 - Unimportant |
| C1P008: Hostile or passive attitude towards environmentalism | 3 - Moderately important | 5 - Very important | 2 - Slightly important | 5 - Very important | 3 - Moderately important | 1 - Unimportant |
| C1P008: Exclusion of socially disadvantaged groups | 2 - Slightly important | 1 - Unimportant | 3 - Moderately important | 5 - Very important | 3 - Moderately important | 1 - Unimportant |
| C1P008: Non-energy issues are more important and urgent for actors | 3 - Moderately important | 1 - Unimportant | 4 - Important | 5 - Very important | 4 - Important | 1 - Unimportant |
| C1P008: Hostile or passive attitude towards energy collaboration | 3 - Moderately important | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 3 - Moderately important | 1 - Unimportant |
| C1P008: Any other Social BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant |
| C1P008: Any other Social BARRIER (if any) | ||||||
| C1P009: Information and Awareness barriers | ||||||
| C1P009: Insufficient information on the part of potential users and consumers | 3 - Moderately important | 1 - Unimportant | 4 - Important | 5 - Very important | 3 - Moderately important | 4 - Important |
| C1P009: Perception of interventions as complicated and expensive, with negative socio-economic or environmental impacts | 3 - Moderately important | 5 - Very important | 4 - Important | 5 - Very important | 4 - Important | 2 - Slightly important |
| C1P009: Lack of awareness among authorities | 2 - Slightly important | 2 - Slightly important | 3 - Moderately important | 5 - Very important | 4 - Important | 1 - Unimportant |
| C1P009: Information asymmetry causing power asymmetry of established actors | 3 - Moderately important | 1 - Unimportant | 3 - Moderately important | 5 - Very important | 4 - Important | 4 - Important |
| C1P009: High costs of design, material, construction, and installation | 5 - Very important | 5 - Very important | 4 - Important | 5 - Very important | 5 - Very important | 3 - Moderately important |
| C1P009: Any other Information and Awareness BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant |
| C1P009: Any other Information and Awareness BARRIER (if any) | ||||||
| C1P010: Financial barriers | ||||||
| C1P010: Hidden costs | 5 - Very important | 5 - Very important | 4 - Important | 5 - Very important | 4 - Important | 3 - Moderately important |
| C1P010: Insufficient external financial support and funding for project activities | 5 - Very important | 5 - Very important | 4 - Important | 5 - Very important | 3 - Moderately important | 1 - Unimportant |
| C1P010: Economic crisis | 3 - Moderately important | 4 - Important | 4 - Important | 5 - Very important | 5 - Very important | 4 - Important |
| C1P010: Risk and uncertainty | 4 - Important | 5 - Very important | 5 - Very important | 5 - Very important | 4 - Important | 4 - Important |
| C1P010: Lack of consolidated and tested business models | 3 - Moderately important | 5 - Very important | 5 - Very important | 5 - Very important | 4 - Important | 3 - Moderately important |
| C1P010: Limited access to capital and cost disincentives | 4 - Important | 3 - Moderately important | 5 - Very important | 5 - Very important | 1 - Unimportant | |
| C1P010: Any other Financial BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 1 - Unimportant |
| C1P010: Any other Financial BARRIER (if any) | ||||||
| C1P011: Market barriers | ||||||
| C1P011: Split incentives | 4 - Important | 4 - Important | 5 - Very important | 5 - Very important | 5 - Very important | 3 - Moderately important |
| C1P011: Energy price distortion | 3 - Moderately important | 5 - Very important | 5 - Very important | 5 - Very important | 5 - Very important | 2 - Slightly important |
| C1P011: Energy market concentration, gatekeeper actors (DSOs) | 4 - Important | 5 - Very important | 4 - Important | 5 - Very important | 3 - Moderately important | 3 - Moderately important |
| C1P011: Any other Market BARRIER | 1 - Unimportant | 1 - Unimportant | 1 - Unimportant | 5 - Very important | 1 - Unimportant | 4 - Important |
| C1P011: Any other Market BARRIER (if any) | ||||||
| C1P012: Stakeholders involved | ||||||
| C1P012: Government/Public Authorities |
|
|
|
| ||
| C1P012: Research & Innovation |
|
|
|
| ||
| C1P012: Financial/Funding |
|
|
| |||
| C1P012: Analyst, ICT and Big Data |
|
|
|
| ||
| C1P012: Business process management |
|
|
| |||
| C1P012: Urban Services providers |
|
|
| |||
| C1P012: Real Estate developers |
|
|
| |||
| C1P012: Design/Construction companies |
|
|
| |||
| C1P012: End‐users/Occupants/Energy Citizens |
|
|
|
| ||
| C1P012: Social/Civil Society/NGOs |
|
|
| |||
| C1P012: Industry/SME/eCommerce |
|
|
|
| ||
| C1P012: Other |
| |||||
| C1P012: Other (if any) | ||||||
| Summary |
Authors (framework concept)
Beril Alpagut (Demir Energy); Giulia Turci (University of Bologna); Michal Kuzmic (Czech Technical University in Prague); Paolo Civiero (Università Roma Tre); Serena Pagliulia (University of Bologna); Oscar Seco (CIEMAT); Silvia Soutullo (CIEMAT); Daniele Vettorato (EURAC Research, IEA Annex 83); Bailador Ferreras M. Almudena (CIEMAT); Vicky Albert-Seifried (FHG ISE)
Contributors (to the content)
Laura Aelenei (LNEG), Nienke Maas (TNO), Savis Gohari (OsloMet), Andras Reith (ABUD), Ghazal Etminan (AIT), Maria-Beatrice Andreucci (Universita Sapienza), Francesco Reda (VTT, IEA Annex 83), Mari Hukkalainen (VTT), Judith-Borsboom (Locality), Gilda Massa (ENEA), Jelena Ziemele (University of Latvia), Nikola Pokorny (CVUT), Sergio Diaz de Garayo Balsategui (CENER, IEA Annex 83), Matthias Haaze (ZHAW, IEA Annex 83), Christoph Gollner (FFG, JPI UE), Silvia Bossi (ENEA, JPI UE), Christian Winzer (Zurich University of Applied Science), George Martinopoulos (Centre for Research and Technology Hellas), Maria Nuria Sánchez (CIEMAT), Angelina Tomova (Energy Agency of Plovdiv)
Implemented by
Boutik.pt: Filipe Martins, Jamal Khan
Marek Suchánek (Czech Technical University in Prague)
